Build your own UV exposure box with fluorescent like lamps
1. Box Construction - Parts

In this section you will find illustrated instructions on how to build the wooden box. We used laminated wood of 1,6 mm for the frame  of the box and hardboard of 2-3mm for the back, the front panels and the small front door. First of all you have to cut the pieces in the appropriate dimensions. The best tool for that job is a fretshow. Each part's dimension that you will need is shown in the next image.
 

 

 

When you finish with the cut of the above pieces it's time to find the parts you see below:

You will need 26 fasteners for wood 3cm tall, 18 wood fasteners for wood 1,5cm tall and 24 general purpose fasteners with 24 nuts. Also you will need two hinges and one grasp for you door. You can use any other material you imagine. Let your imagination work.
All the inside sides must be painted white to reflect some light back.

<<< Index / 2.Box construction - Steps >>>

 

  Electronics-lab.com (C) 2002-2008
Any logo, trademark and project represented here are property of their respective owner - [Privacy Policy]