Articles
Build your own UV exposure box with fluorescent like lamps
Build your own UV exposure box with fluorescent like lamps
4. Lamps Install
|
|
Take of the roof of the box and screw the 8 bases of the lamps. Use the lamp to find the correct distance between them. |
Next you can add a mirror on top of roof for best reflection of light. You can attach it with some strong glue.
Take the two plastic wire canals and put it as image shows below the roof wood. Then pass the wires from all the lamp bases thought the canals and drive them to the back side.
Now add two canals to the two back corners of the box as the red arrow indicates. Place the roof in it's place and pass the wires thought the last added canals so they rich the bottom compartment.
Remove the middle wood and insert the two ballasts and the four starters with their bases at the bottom of the box. Now it's time to make some connections. Proceed to next page.
Elektrotekno.com | Free Schematics Search Engine | Electronic Kits | PCB Assembly