login
Vlad @ denialmedia.ca has build a solar powered weather station based on ATMega328 microcontroller that is able to measure temperature, a humidity, and UV radiation and it uploads measurement on WeatherUnderground network. The data are send to the air using a 433MHz link. The sensors used are DHT22, ML8511, BMP180 and a TP4056 charger IC is used to charge the Li-Po battery from a solar cell.
ATMEGA328 based Weather Station – [Link]
Please follow and like us:
RELATED POSTS
19 July, 2021 Build Smart Home Solutions in 10mins using ITEADs PSF-B Series 1-4 Gang Ultra Low Power ESP8285 Wi-Fi Switch Module
18 October, 2021 Embedded AI platform combines 16-core NXP Layerscape LX2160A processor with up to 5x Hailo-8 NPUs
17 July, 2023 Arduino Uno R4 Minima and R4 WiFi – A Generational Upgrade
24 August, 2020 Meet the ZynqBerryZero: An FPGA Development Board with a Raspberry Pi Zero Form Factor
25 April, 2023 Antmicro creates an open hardware Xilinx Kintex K410T development board
16 September, 2020 Save 10% on Arrow.com orders through e-lab and Oemsecrets.com
Website is offline
No cached version of this page is available.
The website seems down. Please check again later.