[Jeija] was playing with some ESP32s and in true hacker fashion, he wondered how far he could pull them apart and still get data flowing. His video answer to that question covers the Friis equation and has a lot of good examples of using the equation, decibels, and even a practical...

Jakub designed and built a programmable electronic load for Arduino, the MightyWatt R3: MightyWatt R3 is a programmable electronic load. That means you can use it for testing batteries, power supplies, fuel cells, solar cells and other sources of electrical power. You can also make...

Lukas Fässler from Soldernerd has been working on revised version of his MPPT Solar charger project: Over the last few weeks I have been quite busy with my MPPT Solar Charger project. I’ve built up a first board and started writing firmware for it. Since the last version was not...

In this video, Circuit Basics walks us through the steps to change the screen rotation on an LCD touchscreen for the Raspberry Pi. Since there are separate drivers for the display and the touchscreen sensors, we need to change the orientation of both. It's pretty simple to do, but a...

Sometimes it may be necessary to use a display when making a hardware project, but one confusing thing is the size of the display and the required pins to control it. This tutorial will show you how to use a small I2C OLED display with Arduino using only two wires. The display...

A new competitor to Raspberry Pi Zero W is just out! A new single-board computer by Orange Pi that is now available at AliExpress is competing against Pi Zero W, the Orange Pi 2G-IoT. Using this powerful SoC you can build a computer, a wireless server, games, musics and sounds, a...

Massimo Gottardi@ edn.com writes: The Design Idea in Figure 1 is a color detector capable of generating an RGB triplet over a high dynamic range, a useful attribute for machine vision applications. The circuit implements auto-exposure control to achieve this. Thus, RGB values for a...

The LT8641 is a monolithic, constant frequency, current mode synchronous (external schottky diode is not necessary) step-down switching regulator. Its 3V to 65V input voltage range makes it ideal for 12V or 24V automotive and industrial applications. It delivers up to 3.5A of...