Mime Industries launches Kickstarter campaign to fund their Raspberry Pi powered robot arm kit that’s simple enough for kids to build. Mime Industries launched a crowdfunding campaign to fund the production of the world’s first robot arm kit for the Raspberry Pi. Designed to be...

A team of researchers from the US and South Korea reported a unique type of NanoLEDs with unprecedented brightness levels, that excess 80,000 cd/m2, and also can operate both as light emitters and light detectors. These new LEDs are about 50nm long and 6nm in diameter. As described in...

Mill-Max has released its lowest profile target connectors to date with an above board height of only 2.21mm. Target connectors are used in place of SMT pads on a PCB as the mating surface for spring-loaded pins. Low profile target connectors, 2.21mm above the board -...

by Julien Happich @ edn-europe.com: Part of the Swatch group, EM Microelectronic announced what the company believes to be the world's smallest Bluetooth chip. Offered in a 4x4mm QFN-28 package, in a WLCSP-21 or as a bare-die, the EM9304 is optimized for Bluetooth v4.2 low energy...

by Eric Bogers @ elektormagazine.com: Researchers from the Stanford University School of Medicine, using a combination of microfluidics, electronics and a standard inkjet printer, have succeeded in producing a biochip that can be used for research or diagnostic purposes. The...

Bob tipped us about a simple oscillator that uses negative resistance: Normally -according to the Ohm's law- when the applied voltage is increasing, the current is increasing too, however some components can break this law. When the voltage increases, current decreases. This is...

Mobile Roaming allows you to stay connected wherever you are and receive calls and SMSs, but with very expensive cost. So if you don’t have enough budget, you will lose your incoming calls till you are back from a travel. A team of innovators from Egypt had developed a new device...

The Pixel is an Arduino-compatible smart display, combining a 32-bit Cortex M0+ MCU with 32K of RAM, a 1.5" 128x128 color OLED screen, and a microSD slot all in one package. This is Rabid Prototypes’ second iteration of Pixel, which originally raised nearly $10,000 on Kickstarter...