Andrea Belloni writes:
We realized this project for the “Arduino Day” in Rome 14/04/2011. For it we used two JeeNode (Arduino variant with wireless module on-board), one Rainbowduino + RGB LED Matrix and one PC with Processing. The Processing sketch generate the “plasma” animation and sends the images stream to the first JeeNode via serial port. This JeeNode receives the images and sends it to the second JeeNode via wireless link. The second JeeNode receives the images and sends it to the Rainbowduino + RGB LED Matrix via i2c. More details on the blog’s post (for the English version scroll down).
Wireless pixels - [Link]
JeeLabs has a product known as the JeeNode v5, which is essentially a miniature Arduino (Atmega328p) board with an onboard RFM12B wireless module. Boards are available with the serial interface (shown above) as well as USB.
While it’s not an Xbee compatible RF unit, the RFM12B has its own RF12 library of functions which should help you accomplish many control and data transfer tasks.
JeeLabs JeeNode combines Arduino, RF – [Link]
The Ether Card is a basic Ethernet interface for use with the Carrier Board. The ENC28J60 chip is used to drive the on-board RJ-45 connector, including two status LEDs. It can connected to the JeeNode (and many other similar boards, such as Arduino and RBBB) via the SPI bus.
EtherCard – cheap Ethernet module with ENC28J60 – [Link]