Blog
Lantronix xPico module is a highly flexible network connectivity solution for serial interface devices.
Lantronix xPico is thanks to its miniature dimensions (smaller than a usual SD card) suitable even for designs typically intended for chip solutions.
The key difference with the xPico is that there is virtually no need to write a single line of code (FW), resulting to a much lower development cost and faster time to market. The xPico is based on the industry-proven Lantronix device server with a relatively very easy to integration to a target device. Built-in web-manager enables a quick and comfortable configuration.
xPico is suitable for all devices, where it is physically necessary or convenient to use a module with miniature dimensions and a low profile. With the xPico you´re free to place an RJ45 connector according to your demands. That´s why it is possible to utilize the xPico even in space critical designs, where for example the Lantronix XPort wouldn´t suit. Detailed information will provide you the xPico user guide and the xPico integration guide. For a development support also the xPico development kit is available. In case of interest, please contact us at info@soselectronic.com.
Do you need a chip-sized Ethernet ? – [Link]
New Lantronix xPico module brings a highly flexible network connectivity solution for virtually any serial interface device.
With miniature dimensions smaller than a usual SD card, Lantronix xPico is suitable even for designs typically intended for chip solutions. The key difference with the xPico is that there is virtually no need to write a single line of code (FW), resulting to a much lower development cost and faster time to market. The xPico is based on the industry-proven Lantronix device server with a relatively very easy to integration to a target device. Built-in web-manager enables a quick and comfortable configuration.
xPico is suitable for all devices, where it is physically necessary or convenient to use a module with miniature dimensions and a low profile. With the xPico you´re free to place an RJ45 connector according to your demands. That´s why it is possible to utilize the xPico even in space critical designs, where for example the Lantronix XPort wouldn´t suit.
Detailed information will provide you the xPico user guide and the xPico integration guide. For a development support also the xPico development kit is available.
Lantronix xPico – ethernet in the chip-sized module - [Link]
With the new device Lantronix xPrintServer you can print documents on your network printer from any Apple iOS mobile device.
Imagine, in your company you have a visit with some Apple mobile device like iPod, iPhone or iPod touch and your visitor from any reason needs to print some document. A problem is, that with a probability near to surety, in a given mobile device no drivers for your printer will be installed.
This problem is elegantly solved by a new device from company Lantronix – xPrintServer. It is a literally „plug´n´play“ or „plug´n´print“ network device. xPrintServer serves as an „interface“ between a mobile device and a printer. Apple iOS device communicates with a network through your company´s WiFi and the xPrintServer sends data to a network printer through an ethernet cable.
In comparison to other common net devices, a configuration is unbelievably simple. Connect the xPrintServer into your LAN through an ethernet cable (to a router, switch, hub or any place in the network), power up the xPrintServer, and the xPrintServer will auto-discover and auto-provision all printers in the network. No other configuration is necessary, no applications or any other software. All that is necessary to do to print is to sign into you company´s WiFi with a mobile device, open a desired web page, e-mail, photo etc. and choose the icon to open the native print menu. Then from the printer options menu, choose a printer through which you wish to print. Finally, select a number of copies and choose „Print“.
Advantages / Features:
- network device enabling a problemless printing from any Apple iOS device
- supports all devices with Apple iOS 4.2 or higher
- no drivers or special SW necessary
- printing from the native print menu of a mobile device
- extremely simple installation – „plug´n´print“
- automatically searches all available network printers, no configuration
- a big amount of supported printers
Detailed information will provide you the Product Brief, user guide – Quick Start and the List of supported printers.
Print simply and without drivers from Apple iOS devices - [Link]
