This little board demonstrates the capabilities of the MMA2260 +/- 1.5g X-Axis Micromachined Accelerometer. As you tip it back and forth, LEDs light up to show the magnitude and direction of the G force.
The MMA2260 is the fat SOIC 16 in the upper left, isolated so it could be cut off of the board and used as a breakout, keeping only a pin header and the recommended decoupling and output RC filter.
The microcontroller is a PIC16F628, which is entirely unsuited to this application, having no ADC. I failed to notice that, being quick to note “AN0″ on PORTA and slow to note that it was for a comparator, not an ADC. However, there is a builtin programmable voltage reference which was sufficiently accurate for lighting up 8 LEDs. I’m trying to get away from PICs, as AVRs have spoiled me with their GCC support, many registers and sane memory organization. Even on this project, which is only about 30 lines of C, most of the work was fighting SDCC bugs (failure to banksel, in this case). I’ve discovered a perverse pleasure in soldering down ICs to counteract my packrat nature. It did force me to put an ICSP header on, however.
MMA2260 Accelerometer Demo - [Link]