Category: IoT
M5Stack CoreS3 ESP32S3 loT Development Kit
M5Stack CoreS3 ESP32S3 loT Development Kit is based on ESP32-S3 solution, dual-core XTensa LX7 processor. This kit features 240MHz frequency, WiFi® at 16M flash, 8M PSRAM, built-in camera, proximity sensor, speaker, power indicator, I2S amplifier, dual microphone, and condenser touch...
Continue ReadingSequans Monarch Go Certified LTE IoT Category M1 Modems
Sequans Monarch Go Certified LTE IoT Category M1 Modems, connected by Verizon, are comprehensive modem components offering a short route to market and a low Total Cost of Ownership (TCO) to develop cellular-IoT connected devices. The Monarch Go Modems avoid costly lab testing while...
Continue ReadingRaspberry Pi Fleet Management with Qbee
A smart approach to tackle device management In recent years, the popularity of Raspberry Pi has shot up, leading to a growing demand for efficient device management solutions. Currently, some solutions available for device management include: Automated SSH logins Pre-built...
Continue ReadingEspressif Systems ESP32-H BLE & IEEE 802.15.4 Modules
Espressif Systems ESP32-H BLE and IEEE 802.15.4 Modules are powerful, generic BLUETOOTH® Low Energy and IEEE 802.15.4 combo modules featuring the ESP32-H2 chip. The ESP32-H is suitable for building IoT applications with high requirements for power consumption. The Espressif ESP32-H...
Continue ReadingPanasonic PAN1782 Bluetooth 5.1 Low Energy Module at Rutronik
The PAN1782 is ideally suited for battery-powered devices thanks to its extremely low power consumption of only 4.7 mA or 4.9 mA. Panasonic’s PAN1782 leverages the long range of Bluetooth 5.1, offering a higher symbol rate of 2 Mbit/s with the high-speed LE 2M PHY or a...
Continue ReadingNordic Semiconductor Announces nRF54H20, a 4th generation multiprotocol SoC
Nordic Semiconductor, a leader in low-power, high-performance wireless connectivity for the IoT, today introduces the first of its fourth generation of multiprotocol Systems-on-Chip (SoCs): the nRF54H20. This innovative new hardware architecture, fabricated on the GlobalFoundries...
Continue ReadingFeatures of the Seeed Studio XIAO ESP32S3 Development Board
The Seeed Studio XIAO Series are tiny development boards with a thumb-sized size and a comparable hardware architecture. The Seeed Studio XIAO ESP32S3 uses a 240MHz Xtensa 32-bit LX7 dual-core processor, allowing WiFi and Bluetooth 5.0 wireless connectivities, deep sleep mode with power...
Continue ReadingM5Stack has designed CM4Stack development kit for industrial automation
M5Stack has designed CM4Stack, a development kit based on the Raspberry Pi Compute Module 4 for industrial automation and smart home applications. M5Stack has always been developing IoT boards and modules for increased adoption among maker communication and professional embedded...
Continue Reading