Category: Raspberry Pi

An interesting embedded device created by the Sequent Microsystems, Beagle-Pi, a Raspberry Pi Emulator has solved the problem of incompatibility of HATs to a Beaglebone. The Beagle-Pi converts the two 2 x 23 connectors of the Beaglebone into the 2 x 20 GPIO connector of the Pi making...

Shenzhen-based 3D printing device manufacturer BIGTREETECH has released the Raspberry Pi Compute Module 4 powered breakout board with an onboard 5-inch IPS touch display screen– named Raspberry Pad 5. Specifically designed for FDM 3D printers, the 5-inch capacitive touchscreen display...

The Raspberry Pi Zero 2W is a neat upgrade over Raspberry Pi Zero W. It comes in the same form factor of 65mm X 30mm, but it is 100% surface mount. Hence unlike Raspberry Pi Zero W, it sits flat. Raspberry Pi Zero 2W comes with Broadcom BCM2710A1, 1Ghz quad-core 64-bit ARM Cortex-A53...

Onboard-RP2040 | USB-C Type Port | Multiple HAT Connectivity | ESP8266 | 0.91 OLED | 40-Pins GPIO Connectivity | 16 Mega-Byte Flash There are several ways where you can find PiSquare very useful, as we were bound to use a single HAT on Raspberry Pi or max to max 5 Raspberry Pi HATs...

This isn’t the first time UK-based embedded electronic design and manufacturer, SB Components Ltd has released an RFID HAT for Raspberry Pi. The electronic device supplier has launched a crowdfunding campaign on Kickstarter with a goal of £10,000 for its newly designed 40-pin...

We have already come across tens if not hundreds of Raspberry Pi’s in-house silicon tapeout RP2040 integrated boards. The RP2040 was first seen in Raspberry Pi’s own microcontroller board– RPi Pico that features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and...

Even after the release of a 64-bit Raspberry Pi single-board computer, the Raspberry Pi OS remained with the 32-bit version– but in the making of a 64-bit OS. After a series of testing and validation from in-house engineers, while taking feedback from the community after the beta...

Released a few months earlier, the Challenger RP2040 Wi-Fi board comes in an Adafruit Feather form factor integrated with a Raspberry Pi RP2040 dual-core Arm Cortex-M0+ microcontroller with 8MB of flash and a Wi-Fi radio. "This is a spin-off from our Challenger RP2040 Wi-Fi board, but...