3 Phase Bridge Rectifier

[jaijai]

Hi, Am looking for a 3 ph bridge rectifier for 115 vac 400hz delta config, load current around 20amps.
can i go with a rectifier tat is generally used for 50/60 hz.. or is there any specific parameter to be taken care if am using for 400Hz..  am little worried abt I fsm parameter will affect..  kindly let me if is the any particular rule to be followed for 400Hz.

[Hero999]

The recovery time is the only thing you need to be wary of. At 400Hz it shouldn't be too much of a problem. The power dissipated at 400Hz would be slightly higher than it wouls be at 60Hz. I'd advise selecting a part with a higher current rating than you need, go for 25A or 30A.