BENCH POWER SUPPLY

[Staigen]

Hi Um...Me123

I wouldn't have done it this way, i would have connected the leds via a cap and a resistor in series and a diode connected backwards over the led and the whole thing connected directly to the mains outputs! A picture should have explained things, but i have difficulties making one at the moment, it take long time for me just now. Maybee later, if you can wait a few days.

//Staigen

[Staigen]

Hi there Um...Me123, how is it going with this PSU?

//Staigen

[Um...Me123]

Hmmm well it's not done.  Have been really busy with school and I'm just taking a break from the project.  At first I was thinking "where did all my messages go?"  I continued with this project in the board meant for the LM317 supply and I can't remember if you had made any replies in there or not but if you go look you will learn that I hooked up the LM317 backwards and fried it and the pot.  I then re-wired it the write way and thats when I figured out the LM317 was bad so now I have de-solder it all again and guy new stuff and it's just a big mess.  So I took a little break until next time we happen to go by radioshack.b

[Staigen]

Ok, let us know when you buy new parts

//Staigen