Parallel Port Breakout board with Buffer for CNC & Routers

  • Rajkumar Sharma
  • 44.025 Views
  • medium
  • Tested
  • SKU: EL49253
  • Quote Now

Parallel-Port-Breakout-CNC-PIC2

Parallel port I/O break out board designed for Hobby CNC, Routers and Motion controller ,  This Board is an easy solution to driver stepper Motor driver, AC Servo (with Step-DIR Driver) and DC servo (with Step-DIR Driver), The Board is compatible with various CNC software specially made for LPT port data out. The board has been tested with MACH3 CNC software.   All outputs are buffered, all inputs are optical isolated and can be used as emergency switch, limit switch and home switch.

The board has 12 output pins that can control various devices such as stepping motor drivers, AC Servo Driver, DC Servo Driver,  Plasma Torch, Pump for coolant, spindle, 5 Input pins are provided for limit or home switches, feedbacks, Emergency switch.  All inputs has 470E for current controlled and TTL Voltage input required driving the inputs. This board can be powered with USB input or DC input supply 7V to 36V, keep jumper J2 open in case of USB supply input. Board has Screw Terminals for Inputs and out connections and also provided with 4X6Pin header connecters for outputs. J15 is connected directly to parallel port pins for testing purpose.

Note: For 24V input signal replace of R3, R4, R5, R6, and R7 with 2K2 Ohms.

Features

  • Supply 7V to 36V DC
  • 25 D SUB Female Connecter for PC LPT Port Interface
  • On Board Power LED
  • On Board USB Connector for Supply from PC or other USB source
  • Jumper Selection for USB Supply Input or External Supply
  • All Outputs are buffered
  • All inputs are optically isolated
  • Two Options for Outputs, Screw Terminals and Header Connectors
  • 4X6Pin Header for easy motor driver interface
  • On Board L317 Regulator for 5V DC
  • Heat sink for regulator
  • 5V DC Output for External Circuits
  • 3X3 Header Connector for Relay Driver for Spindle, Plasma, Laser, Pump ON/OFF

Connections

  • CN15 : LPT Port Test Pins
  • CN7 : Inputs , Limit Switch, Feedback, Home Switch, Emergency Switch
  • CN1 : DC Supply Input 7V to 36V
  • CN2 : DC 5V Output
  • CN10, CN11, CN12, CN13 : Header Connector for Stepper driver Interface
  • CN8, CN9, CN14 : 3X3Pin Header Connector to driver Relay for Outputs
  • CN5 : Outputs
  • J3 : E Stop Optional Jumper for Test Purpose
  • J4, J5 : I/O Direction Control ( Jumper Close to VCC for Normal Operation)
  • CN6 : USB Connecter for VCC Supply input ( Keep Jumper J1 Open for USB Supply Input)
  • D1: Power LED

Schematic

Parallel-Port-Breakout-CNC-SCH

Parts List

Parallel-Port-Breakout-CNC-BOM

Connections

Parallel-Port-Breakout-CNC-connections

Configuration

Parallel-Port-Breakout-CNC-LPT I-O

Photos

Parallel-Port-Breakout-CNC-PIC

Please follow and like us:
Pin Share

PCB



Subscribe
Notify of
guest

34 Comments
Inline Feedbacks
View all comments
mukesh pandey

i want to make a 5 axis breakout board with spindle speed control. but in your design spindle speed control is not available.
please help me on this.

M

Hello, i have searched for spindle speed control circuit without any luck. Its possible that you help out how we could add that on circuit?

Asad

Hi
Thank you for your web site

1- For running stepper motor we need a power supply. Where is input of power supply on board?

2- in the black and white photos there is many black circular that these join with 1 or 2 or 3 or more tin black wire to extensive black area
Is this black wire is error in your design?

I add a link that help you to understand my mind of question 2!
http://s8.picofile.com/file/8333387626/0.png

Thank you again

Asad

Hi
Do you have gerber file of this PCB?

Asad

Thanks, So thanks

1- How can I convert gerber to .nc files for CNC millig?

2- Can we run 5-axis CNC by this boards? Do you have controller board for 5-axis CNC?

3- There is a 6-pin set of yellow pins far from the other yellow pins on the board, What is its use?

4- Is this 6 pins yellow for the fifth axis?

I add a link that help you to understand my mind
http://s9.picofile.com/file/8335384376/2.jpg

Thanks again and regards
Asad

Asad

And:
6- Can we run this board only by usb port?

Thanks again and regards
Asad

twovolt

Hi Asad,
please check bellow link, i have used this board for my own large size CNC router, it has 5 axis stepper drives but 2 axis are parallel so actually i have used 4 axis.

http://www.twovolt.com/2018/10/13/my-5-axis-cnc-milling-_-cnc-router-controller_-mach3_mach4_uccnc-machine-control-software/

twovolt

Please check the video ( Aqcor Inc used this board for 4 axis CNC machine)

https://www.youtube.com/watch?v=ANnz1M8GhNA
https://www.youtube.com/watch?v=jHWk5j1n0q8

Asad

Hi Twovolt
Thank you very much for all your reply
I checked all your links and send an email for you
Please check it
Thank you so much again

Asad

Hi
Do you have .pcb or .pcbdoc or .ddb or .LYT files of this PCB?
Thanks

Asad

Hi

Do you have a photo of behind of board?

Asad

Hi

Please share a photo of behind of board

How many smd capacitors are used behind of board?

Asad

Okay
I will wait!
Your welcome

Asad

Hi
we want to run this board by mach3, for configuration of port and pin , What is the phrase in the Port Address that we should write in configuration of port and pin windows and other settings?

Please attention to photo in follow link:
http://s8.picofile.com/file/8343527450/unnamed.png

For connect stepper motor to board, we have 4 Phase connector on stepper motor but on board there is 6 connector that include 3 earth, and that is impossible to connect stepper motor to board we have to have 4 phase connector on board !!!

Please help me to solve problem!

Asad

Please help me to solve problem!

Asad

Thank you so much for your reply and answer to my question
Thank you so much for your try to draw the graphic, I need your graph very much, and please sent it early

twovolt

Hi Asad,

Download Mach 3 manual from Mach website to setup the outputs and inputs, read manual it has answers of all your questions.

It would be great if can email your questions to me at raj@twovolt.com ,

Thanks,
Raj

Asad

Dear Raj
I Install mach3 on my system and I assemble this board and I want to run it by mach3 but I need to more data
I’m going headway step by step 🙂 🙂
And may be I have very question and I sent email to you

twovolt

Hi Asadollah,

One Small yellow mark is 12V SMPS to power the breakout board . blue circle Silver color large size devices is 7.2Amps stepper driver,

This unit has 5 stepper motor driver , 4 provides 4.2Amps and 5th is 7.2 Amps, this 4th one for Z axis, usually Z axis required high current motor to hold vertical spindle load for large size machines.
out of 5 axis , one is spare ( No Use) two are parallel input Y axis has two parallel motors mounted, one is for X axis and 5th for Z-axis.

Regards,
Raj

Asad

Hi
I’m Asad that I needed to help for making and install ” PARALLEL PORT BREAKOUT BOARD WITH BUFFER FOR CNC & ROUTERS ” from https://www.electronics-lab.com/project/parallel-port-breakout-board-with-buffer-for-cnc-routers/

I assembled PARALLEL PORT BREAKOUT BOARD and I install mach3 and I don’t change the setting and config of mach3
I install software and I connect an LED to any step/dir pin to GND with 470E resistor to check Pin Enable and Pin Step/Dir on board that we connect them to stepper motor driver, but when I presser direction key on keyboard to turn on X , Y , Z axis pin on board do not turn on LED to check X , Y , Z axis pin

http://s8.picofile.com/file/8346452918/11111111111111111111.jpg

Do I need change the config of mach3?

Thank and regard
Asad

Asad

How can I use of this guide?

comment image

Best Regards

Asad

Hi friend
How are you?
How can I use of this guide?

comment image

Can you give me screen shot of all inputs and outputs and other data in configuration windows of mach3?

Best Regards

Asad

My friends

No one can answer my request?
How can I config mach3 on this board?

Best regards

asadollahahmadian

Hi dear friend

I assembled this board and I want to config mach3 on my computer to run this boards but I can not

Can any people help me to config mach3 to run this board

Thanks and regards

Andrew

The Parallel Port Breakout board has very good parameters. However when it comes to CNC Motion controller, I recommend this https://en.cs-lab.eu/shop-cat/cnc-motion-control-system-csmio-products-sets/ . Although it looks like an ordinary small box, connected with a PC and appropriate control software it will supervise the correctness of any CNC appliance operations.

aLBERTO Arreda

I Mr Mike waht is the speed of this board do you test? also do you have a same board but for lpt2?
great job.
thanks
Alberto Arreda

RELATED PROJECTS

TOP PCB Companies