This
circuit controls resistive and inductive loads up to 2,500W. Its
main functional device is an integrated phase control circuit - Siemens
TLE3103. It contains its own
power supply, a zero voltage crossing detector circuit and a logic
driver. An additional feature is the low voltage input to
enable/disable triac firing enabling/disabling the logic driver. The
function is as follows: pin13 TLE3103 open (floating), trigger
output active, tied to ground trigger output disabled.

click image for
higher resolution or
download it in PDF
An UP and a
DOWN pushbutton control a 32-step digital potentiometer (IC2,
AD5228) via the debouncer IC1 (MAX6817).
The digital potentiometer has a power on reset pin which might be tied
to ground causing the potentiometer to start at midscale, or to VCC
causing it to start at zero scale. The desired function is selectable
using jumper JP1. The triac (capable of driving 40A loads) is a bit
overkill for the desired power but the BTA41 has an isolated body and
therefore handling of the board under voltage is less dangerous as it is
with phase on the package. The snubber circuit uses a 68ěH inductance
but this might be replaced with a 100 resistor. When replacing the
inductance C5 should have a value of 47nF.
Board:
Purely single sided, measurements: 3.54X2.15 inches (87.63X54.61mm)
Remark:
The debouncer circuit is manufactured with a SOT23-6 package. It might
be soldered directly onto the board (DIP-6 package) using thin wires or
an adapter board.
Part Value Package
C1 100n C-5
C2 100n C-5
C3 100/16 ELC3,81
C4 22n C-5
C5 10n/250VAC C-15
D1 1N4005 DO41-10
IC1 MAX6817 AD-SOT23
IC2 AD5228 DIL08
IC3 TLE3103 DIL-14
J1 TE-03 TERMINAL 5.08
J2 TE-03 TERMINAL 5.08
J3 TE-03 TERMINAL 5.08
L1 68H/3A DS30A
Q1 BTA41-600 TOP3
R1 120R R-10
R2 18K/2W R-18
R3 820K R-10
R4 180K R-10
R5 56K R-10
S1 UP BUTTON-02
S2 DOWN BUTTON-02

Download pcb in
PDF format

Download pcb in
PDF format

Download pcb in
PDF format

Download pcb
in PDF format
Download
this circuit in ZIP
Download
EAGLE files in ZIP