Tag Archives: 2N3055

Testing the photovoltaic effect with a transistor

When you expose the silicon die of a transistor to a light source a charge is produced. CircuitsDIY opened up a 2N3055 transistor and did some experimenting. With the help of a magnifying glass he was able to built up a charge of 0.65V and produce 42.2mA of current. [via]

Most photovoltaic cells are made of silicon chip above which there resides a very thin layer of noble metal through which around 1% of photon particles enter the material and activates electron flow. Here I’m showing how to make one simple solar panel using transistor.

Testing the photovoltaic effect with a transistor – [Link]

10A 1-30V Variable Power Supply with LM317

Here is a simple and economical 10A variable power supply with 1.2-30V. LM317 have been used to drive 3 NPN TIP41C transistors (or three 2N3055). Nothing to say about the project, it is really simple. The main supply must be connected to a rectified source (transformer + 20-30A bridge rectifier). For Q1,2 and 3 can be used any power TO220 transistor (TIP132C,TIP41C etc) or three external 2N3055 transistors. [via]

10A 1-30V Variable Power Supply with LM317 – [Link]

2N3055 Power Amplifier

Simple and low cost. The optimal supply voltage is around 50V, but this amp work from 30 to 60V. The maximal input voltage is around 0.8 – 1V. As you can see, in this design the components have a big tolerance, so you can build it almost of the components, which you find at home. The and transistors can be any NPN type power transistor, but do not use Darlington types… The output power is around 60W.

2N3055 Power Amplifier – [Link]