Single IC can produce isolated or non-isolated ±12V outputs
IC

Single IC can produce isolated or non-isolated ±12V outputs

Linear Technology’s 560 VIN micropower no-opto isolated flyback converter with 630 V / 300 mA switch Linear Tech's LT8315 high voltage flyback converter with integrated 630 V / 300 mA switch needs no opto-isolator for regulation. It samples the output voltage from the...

Continue Reading
3.585
Views
0 Comments
Buck-Boost Battery Charge Controller with MPPT and I2C
IC

Buck-Boost Battery Charge Controller with MPPT and I2C

The LT8491 from Analog Devices is a buck-boost switching regulator battery charge controller that implements a constant-current constant-voltage (CCCV) charging profile used for most battery types, including sealed lead-acid (SLA), flooded, gel and lithium-ion. Applications are...

Continue Reading
6.998
Views
0 Comments
NXE1S0303MC – 3.3V 303mA, 1W DC-DC Converter has Embedded Transformer
Power

NXE1S0303MC – 3.3V 303mA, 1W DC-DC Converter has Embedded Transformer

The NXE1 series is a new range of low cost, lower profile, fully automated manufacture surface mount DC-DC converters. The NXE1 series automated manufacturing process with substrate Embedded Transformer, offers increased product reliability and repeatability of performance in a...

Continue Reading
2.735
Views
0 Comments
MAX20075 Mini Buck Converter
IC

MAX20075 Mini Buck Converter

Maxim's MAX20075 mini buck converter helping improve automotive ECU design with a low-Iq buck converter. The MAX20075/MAX20076/MAX25276 are small, synchronous buck converters with integrated high-side and low-side switches. The MAX20076/MAX25276 are designed to deliver up to 1.2A and...

Continue Reading
2.580
Views
0 Comments
Multi-output Power Supply Based on LM2576HV-ADJ
Power supply

Multi-output Power Supply Based on LM2576HV-ADJ

This is a multi-output power supply based on LM2576HV-ADJ and LM317 IC. The power supply provides 3 outputs with input supply up to 55V DC. Output (O1) is adjustable up to 24V DC and load current of 2A, Output (O2) is adjustable to 1.2V-24V with load current up to 500mA and Output (O3)...

Continue Reading
3.036
Views
1 Comments
High Power LED flashing beacon uses a switching regulator
Led

High Power LED flashing beacon uses a switching regulator

This flasher/beacon circuit can be employed as a distress signal on highways, a direction pointer for parking lots, hospitals, and hotels, etc. The circuit uses a power LED, and provides more light than a typical incandescent lamp flasher. Use of a 6 V or 12 V SLA lantern battery makes...

Continue Reading
3.662
Views
0 Comments
60V to 5V @ 3.5A Buck converter with USB output
Power supply

60V to 5V @ 3.5A Buck converter with USB output

This is a 60V to 5V – 3.5A step down DC-DC converter based on TPS54360B from Texas Instruments. Sample applications are: 12 V, 24 V and 48 V industrial, Automotive and Communications Power Systems. The TPS54360 is a 60V, 3.5A, step down regulator with an integrated high side MOSFET....

Continue Reading
3.819
Views
0 Comments
Extend battery life with the 60nA quiescent current TPS62840
IC

Extend battery life with the 60nA quiescent current TPS62840

If you’re looking to reduce quiescent current and extend the lifetime of your system’s battery, then the TPS62840 is the device for you. At an astonishing 60nA of operating IQ, TPS62840 is the world’s lowest quiescent current DC/DC switching regulator. From IoT to smart meters,...

Continue Reading
2.849
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives