Tag Archives: Inverting

LT8362 – Low IQ Boost/SEPIC/Inverting Converter with 2A, 60V Switch

The LT8362 is a current mode, 2MHz step-up DC/DC converter with an internal 2A, 60V switch. It operates from an input voltage range of 2.8V to 60V, suitable for applications with input sources ranging from a single-cell Li-Ion battery to automotive and industrial inputs. The LT8362 can be configured as either a boost, SEPIC or an inverting converter. Its switching frequency can be programmed between 300kHz and 2MHz, enabling designers to minimize external component sizes and avoid critical frequency bands, such as AM radio. Furthermore, it offers over 90% efficiency while switching at 2MHz. Burst Mode operation reduces quiescent current to only 9μA while keeping output ripple below 15mVP-P. The combination of a 3mm x 3mm DFN or high voltage MSOP-16E package and tiny externals ensures a highly compact footprint while minimizing solution cost.

LT8362 – Low IQ Boost/SEPIC/Inverting Converter with 2A, 60V Switch – [Link]

Regulator offers independent outputs

1474473440-umodule

Susan Nordyk @ edn.com writes:

Housed in a 15×9×2.42-mm over-molded BGA package, the LTM8049 µModule dual-output DC/DC converter from Linear Technology is configurable for a combination of SEPIC and/or inverting operation by simply grounding the appropriate output rail. All that is needed to complete the design are input and output capacitors and a few resistors—a total of 7 components compared to approximately 30 components for a comparable discrete design.

Regulator offers independent outputs – [Link]

LT8335 – Converter minimizes quiescent current

lt8335col_1

Outfitted with a 2-A, 28-V power switch, the LT8335 2-MHz step-up DC/DC converter from Linear Technology operates from an input of 3 V to 25 V, suitable for applications with input sources ranging from a single-cell lithium-ion battery to automotive inputs.

The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very low output currents while keeping the output ripple below 15mV in a typical application. The internally compensated current mode architecture results in stable operation over a wide range of input and output voltages. Integrated soft-start and frequency foldback functions are included to control inductor current during start-up. The 2MHz operation combined with the small 8-lead DFN package, enables low cost, area efficient solutions.

LT8335 – Converter minimizes quiescent current – [Link]

LT8335 – Low IQ Boost/SEPIC/ Inverting Converter with 2A, 28V Switch

lt8335col_1
LT8335 is a current mode, 2 MHz step-up DC/DC converter with an internal 2A, 28V switch. It operates from an input voltage range of 3V to 25V, suitable for applications with input sources ranging from a single-cell Li-Ion to automotive inputs.

The LT8335 can be configured as either a boost, SEPIC or an inverting converter. It uses a fixed 2 MHz switching frequency, enabling designers to minimize external component sizes and avoid critical frequency bands, such as AM radio. Burst Mode operation reduces quiescent current to 6 µA while keeping output ripple below 15 mVP-P. The combination of a 3 x 2 mm DFN package and tiny externals ensures a very compact footprint while minimizing cost.

LT8335 – Low IQ Boost/SEPIC/ Inverting Converter with 2A, 28V Switch – [Link]

5V TO -12V Inverting Switching Regulator

PIC

The DC/DC inverting switching regulators project is specifically designed to invert input voltages to negative outputs. It offer input voltage ranges from 4.5V to 6V and output -12V 100mA The MC34063A IC is heart of the project from On semiconductor. The MC33063A is a monolithic control circuit containing the primary functions required for DC-DC converters, This device consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switch. This IC specially designed to be incorporated step-down, step-up, and voltage-inverting applications with minimum number of external components.

Features

  • Input 4.5V To 6V DC
  • Output -12V 100mA
  • Output Fine Adjustable By On-board Preset
  • Header Connector for Output/Input Connections
  • Low Standby Current
  • On Board Filter To Provide Low Ripple Output
  • PCB Dimensions 31.75mmX34.93MM

5V TO -12V Inverting Switching Regulator – [Link]

LT8331 – Low IQ Boost/SEPIC/ Flyback/Inverting Converter

8331

Linear Technology Corporation announces the LT8331, a current mode step-up DC/DC converter with an internal 500mA, 140V switch. It operates from an input voltage range of 4.5V to 100V, making it suitable for use with a wide range of input sources found in industrial, transportation and avionic applications. The LT8331 can be configured as either a boost, SEPIC, flyback or inverting converter. Its switching frequency is programmable from 100kHz to 500kHz, enabling designers to minimize external component sizes.  Burst Mode® operation reduces quiescent current to only 6µA while keeping output ripple below 20mVP-P. The combination of a high voltage MSOP-16E package and tiny externals ensures a very compact footprint while minimizing solution cost.

LT8331 – Low IQ Boost/SEPIC/ Flyback/Inverting Converter – [Link]

1A, 2 MHz, 60V boost/SEPIC/inverting DC/DC converter, 6µA Iq

8330

by Graham Prophet:

LT8330 is a current mode, 2 MHz step-up DC/DC converter with an internal 1A, 60V switch. It operates from an input voltage range of 3V to 40V, making it suitable for applications with input sources ranging from a single-cell Li-Ion to automotive inputs.

The device can be configured as either a boost, SEPIC or an inverting converter. It uses a fixed 2 MHz switching frequency, enabling designers to minimise external component sizes and avoid critical frequency bands, such as AM radio. Burst Mode operation reduces quiescent current to 6 µA while keeping output ripple below 15 mVP-P. The combination of a 3 x 2 mm DFN or TSOT-23 package and tiny externals ensures a very compact footprint while minimising overall cost.

1A, 2 MHz, 60V boost/SEPIC/inverting DC/DC converter, 6µA Iq – [Link]

Power supply IC generates low-noise bipolar (+/-) power rails

3265

by Graham Prophet @ edn-europe.com:

LTC3265 is a high voltage, highly integrated, low noise dual output power supply IC which takes a single positive input supply (VIN_P) and generates low noise bipolar rails up to ±2•VIN_P without any inductors. High voltage boost and inverting charge pumps deliver low noise dual outputs with post-regulating ±50 mA LDOs

The device includes a boost doubling charge pump, an inverting charge pump and two low dropout (LDO) regulators. The boost charge pump has a 4.5V to 16V input range and powers the positive LDO post regulator from its output, VOUT+. The inverting charge pump has a wider input range (4.5V to 32V) which may be connected to either the boost input or output. The negative LDO post regulator is powered from the output of the inverting charge pump, VOUT-. The LTC3265 is suited for a variety of applications that require low noise bipolar supplies from a high voltage input, such as industrial/instrumentation low noise bias generators, portable medical equipment and automotive infotainment systems.

Power supply IC generates low-noise bipolar (+/-) power rails – [Link]