Tag Archives: Mic

Sound to RC Servo Driver

This project is designed for Animatronics and Puppeteer applications, however it can be used in other applications like sound responsive toys, robots etc. Especially this project helps to move the jaw or mouth of animatronics creature.

The project moves RC servo once receives any kind of sound.  Rotation angle depends on sound level, more the sound level more the movement. Movement of the servo is proportional to sound level.

Circuit has 4 channel servo drivers, First channel is driven by sound, and rest 3 RC servos controlled by on board trimmer potentiometer, these 3 channels helps to drive other movement of animatronics figure.

Sound Received by microphone is convered to DC voltage, PIC16F72 microcontroller converts DC voltage into RC PWM signal. Circuits works with 6V DC , advisable to use battery for low jitter.

Sound to RC Servo Driver – [Link]

Tiny Professional Microphone Preamplifier

The board has been design around INA217 low distortion, low noise instrumentation amplifier. The INA217 is ideal for low-level audio signals such as balanced low-impedance microphones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth. Unique distortion cancellation circuitry reduces distortion to extremely low levels, even in high gain. The INA217 provides near-theoretical noise performance for 200Ω source impedance. The INA217 features differential input, low noise, and low distortion that provides superior performance in professional microphone amplifier applications. An OPA2137 op-amp used as a feedback to eliminate the offset voltage. Phantom power is not part of the circuit its just for reference.

Features

  • Supply Dual +/-15V DC
  • Output Unbalance Single Ended
  • PR1 Gain Adjust G=1+10000/Rg PR1

Tiny Professional Microphone Preamplifier – [Link]

Low noise Mini Electret Microphone PreAmplifier

img_5974

The single supply microphone pre-amplifier amplifies the output signal of an electret capsule microphone to audio line levels. An op amp is used as a trans-impedance amplifier to convert the output current from the microphone in to a signal level voltage. The circuit works with 9V so it is good choice for battery operated systems.

Features

  • Supply 9V DC
  • Current Approx. 3mA
  • On Board Microphone
  • Very thin and narrow PCB

Low noise Mini Electret Microphone PreAmplifier – [Link]

Tiny Mic Preamplifier

A017

The Tiny Mic Preamplifier based is based on a single transistor amplifier design. It amplifies the output of the electret condenser microphone. Good choice for Karaoke.

Specifications

  • Power supply: 5 ~ 9 VDC @ 2 mA
  • Provides standard audio signal
  • PCB dimensions 26 mm x 56 mm

Tiny Mic Preamplifier – [Link]