Tag Archives: power meter

Teardown & Repair of an Agilent N1912A P-Series Power Meter

In this episode Shahriar investigates a peculiar problem with an Agilent P-Series Power Meter. While the instruments works during startup, after about 10 minutes the LCD screen begins to flicker and become scrambled. Initial investigation reveals that the issue is not likely with the main motherboard since USB connection to the instrument and data-readout is possible even when the LCD screen is malfunctioning.

Teardown & Repair of an Agilent N1912A P-Series Power Meter – [Link]

Simple 3 phase Arduino energy meter

Simple 3 Phase Arduino energy meter from The DIY Life:

Again, with this meter I was going for simplicity. Sure, for perfectly accurate measurements you need to measure both the supply current and voltage but for this application and in the interests of keeping the energy meter simple and safe – only requiring a non-contact connection to your mains – I’ve decide to stick with a simple current measurement which gives you an estimate to within a couple of decimal points of a kilowatt hour.
This meter measures the supply current through each phase using a CT (current transformer) and then does a few calculations to give you the current, power, maximum power and kilowatt hours consumed for each phase.

Simple 3 phase Arduino energy meter – [Link]