Tag Archives: TinyFPGA

Tiny FPGA BX – A Tiny, Open Source FPGA development board for Makers

The TinyFPGA boards from Luke Valenty (TinyFPGA) are a series of low-cost, open-source FPGA development boards. These boards offer an inexpensive way to get an introduction to the world of FPGAs.

If you have ever considered working with an FPGA before, you will know how difficult they could be especially for those new to the game. TinyFPGA boards are an excellent way to kickstart development with them. They are breadboard friendly, and one can put up a simple circuit around them before adding things like sensors or actuators.

The TinyFPGA boards are currently made up of about three series – The TinyFPGA A1 that offers an X02-256 containing 256 logic cells; the A2 sports with an X02-1200 of about 1200 logic cells, and lastly the B2 boats an ICE40LP8K with 7680 logic cells. They are low cost in nature, costing about $12,00, $18,00 and $38.00 respectively. The latest upcoming release to the TinyFPGA board family is the TinyFPGA BX.

Like the other Tiny FPGA Boards, the Tiny FPGA BX boards is quite flexible and powerful. The BX boards are intended for the maker’s community. The BX module allows one to design and implement a digital logic circuit in a tiny form-factor, and it’s perfect for building with breadboards or custom PCBs.

The TinyFPGA BX shares close similarities with the TinyFPGA B2 and are both based on the Lattice ICE40LP8K FPGA Chip with about 7680 logic cells. The BX board will offer an incredible power to project development and allows to achieve things not usually expected on traditional microcontroller boards at a fraction of the cost.

According to Luke, the TinyFPGA BX prototype boards are currently being manufactured. The PCBs have been fabricated and are now waiting for assembly.

The BX measure at 0.7 by 1.4 inches and comes with a built-in USB interface, and preloaded with a USB Bootloader. It is expected to have 8Mbit of SPI Flash with only 5Mbit available for user applications.

The following are some of the available board specifications:

    • 7,680 4-input look-up-tables
    • 128 KBit block RAM
    • Phase Locked Loop
    • 41 IO pins
  • Small, breadboard friendly form-factor
    • 0.7 by 1.4 inches
  • Built-in USB interface with open source USB bootloader
  • 8MBit of SPI Flash with 5MBit available for user applications
  • Integrated 3.3v and 1.2v regulators
    • 3.3v LDO regulator can supply up to 300ma of current to support external peripherals
  • Ultra-Low-Power 16MHz MEMs Oscillator
    • 1.3ma active power
    • 50ppm stability

These TinyFPGA boards offer an inexpensive way for hackers and makers to get an introduction to the world of FPGAs. And, with their small size, these boards can provide an easy way to add some programmable logic to a small project.

FPGA gives us the power to add real deal hardware functionality to our project, unlike with Microcontroller, where those features can only be added to a bit of software banging. The TinyFPGA Bx boards are still not fully launched yet, so now price point is currently available but is expected to share similar costing with the TinyFPGA B2 at $38.00.

More information about the project launch can be found on the crowdsupply page and also on the hackaday board page announcement. If you are interested in getting introduced to the world of FPGA, this guide from Luke is an excellent way to kickstart your adventure.

TinyFPGA Programmer

A dirt cheap open hardware USB-JTAG board designed to program TinyFPGA A1 and A2 boards. by Luke Valenty @ hackaday.io:

One of the goals of the TinyFPGA boards is to make FPGAs cheaper to use. The #TinyFPGA A-Series boards are the first TinyFPGA boards and are designed to be the least expensive. As such, they do not include a built-in USB interface as that would increase the cost and complexity too much. Instead they rely on JTAG programmers.

TinyFPGA Programmer – [Link]