Vivid Unit – An RK3399-Based SBC with a Built-In Touchscreen Display
LCD/OLED/ePaperTop Stories

Vivid Unit – An RK3399-Based SBC with a Built-In Touchscreen Display

The Vivid Unit is an RK3399-based Single Board Computer (SBC) featuring a 5.5-inch touchscreen display, 4GB LPDDR4 RAM, and 32GB eMMC storage along with Ethernet, Wi-Fi (802.11b/g/n), and Bluetooth 4.1, USB 3.1 Gen1, HDMI, and a 40-pin GPIO harder. They were designed for smart home...

Continue Reading
1.099
Views
0 Comments
DFRobot introduces Unihiker, an all-in-one single-board computer running Debian OS
SBCTop Stories

DFRobot introduces Unihiker, an all-in-one single-board computer running Debian OS

Introduction DFRobot, a leading provider of open-source hardware and robotics solutions, has recently launched the latest addition to its long list of single-board computers, called Unihiker. This hardware device is equipped with a built-in 2.8-inch touchscreen and offers a range of...

Continue Reading
1.243
Views
2 Comments
Sunflower Shield – A 3.5” TFT Touch Screen Display for the Arduino
ArduinoLCD/OLED/ePaper

Sunflower Shield – A 3.5” TFT Touch Screen Display for the Arduino

The Arduino has been a household name in the hardware market for a long while now and many vendors have released various add-on devices usually called Shields to expand the functionality of Arduino. One such add-on device is the newly launched Sunflower shield that will allow users to...

Continue Reading
5.424
Views
0 Comments
Raspberry Pi LCD Touchscreen Rotation
Raspberry Pi

Raspberry Pi LCD Touchscreen Rotation

In this video, Circuit Basics walks us through the steps to change the screen rotation on an LCD touchscreen for the Raspberry Pi. Since there are separate drivers for the display and the touchscreen sensors, we need to change the orientation of both. It's pretty simple to do, but a...

Continue Reading
4.341
Views
0 Comments
2.8″ TFT LCD Touch Screen ILI9325 with Arduino Uno and Mega
ArduinoLCD/OLED/ePaper

2.8″ TFT LCD Touch Screen ILI9325 with Arduino Uno and Mega

educ8s.tv uploaded a new video. This is a 2.8” Arduino Touch Screen Tutorial with the ILI9325 driver. Nick writes: Hey guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics projects with Arduino, Raspberry Pi, ESP8266 and other popular boards. Today...

Continue Reading
10.330
Views
0 Comments
Using Low Cost Hardware to Enhance the User Experience
LCD/OLED/ePaper

Using Low Cost Hardware to Enhance the User Experience

Ken Boak discuss how to build a graphic user interface using cheap TFT toughscreen displays. This article is about using their lowcost graphics co-processor IC to provide a neat user interface for any low-end microcontroller. These days, when you can buy a 7" tablet for $50, there...

Continue Reading
4.252
Views
0 Comments
Touchscreen-controlled Arduino Geiger Counter
Arduino

Touchscreen-controlled Arduino Geiger Counter

by Toumal @ github.com: A touchscreen-controlled Geiger Counter for Arduino. Requires a Radiation Watch Pocket Geiger sensor, a ITDB02 Display from SainSmart and an Arduino Mega. Software needs my fork of the RadiationWatch library, the ITDB02 library as well as the UTouch...

Continue Reading
7.475
Views
0 Comments
Plug-in touchscreen makes a Raspberry Pi tablet
LCD/OLED/ePaper

Plug-in touchscreen makes a Raspberry Pi tablet

by Graham Prophet @ edn-europe.com: Distributor element14 has a 7-in. Touchscreen Display for the Raspberry Pi, expanding the ecosystem of accessories, to enable users to create all-in-one integrated projects such as turning their Pi into a tablet, infotainment system or embedded...

Continue Reading
5.175
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives