Arduino Proximity Alarm
Arduino

Arduino Proximity Alarm

Lucas Reed @ instructables.com has build a proximity alarm using Arduino and an ultrasonic sensor from Parallax. If a nearby object is approaching then the alarm will sound and an RGB LED will light up. He writes: An ultrasonic rangefinder and Arduino microcontroller will check for...

Continue Reading
5.702
Views
0 Comments
Portable Ultrasonic Range Meter
Test/Measurements

Portable Ultrasonic Range Meter

ManosM @ instructables.com has build a portable ultrasonic range meter based on ATMega328 mcu and LCD display. This device is a small, portable ultrasonic range meter using an ATMega328 microcontroller, an ultrasonic module and a 4x20 LCD for ranging distances in meters and...

Continue Reading
6.956
Views
1 Comments
Ultrasonic Atomizer
Miscellaneous

Ultrasonic Atomizer

This reference design is a simple ultrasonic atomizer that helps fight against respiratory diseases. Atomizer is like nebulizer, it is just that nebulizer takes time to deliver liquid to mist. However, both undergo almost the same process. This medical ultrasonic atomizer circuit is...

Continue Reading
10.683
Views
1 Comments
HC-SR04 Ping Sensor Hardware Mod
Sensor

HC-SR04 Ping Sensor Hardware Mod

by cascologix.com: HC-SR04 ultrasonic sensor modules, also commonly called ping sensors, are practically a dime a dozen, with many Asia online retailers selling them in the $2 to $3 dollar range each. While possibly not intended for an end solution or product, these sensors offer a...

Continue Reading
4.537
Views
0 Comments
DIY Digital Tape Measure
Arduino

DIY Digital Tape Measure

by electronics for everyone @ instructables.com: Today I hope to teach you all about ultrasonic sensors and hopefully by the end you'll have a nice little digital tape measure of your own to use as you please. This is my second version of this project so if you can get it as small...

Continue Reading
5.224
Views
0 Comments
Analog Ultrasound Range Finder
Test/Measurements

Analog Ultrasound Range Finder

by netzener @ instructables.com: When I started my career in control systems I was fascinated with the many different ways that machines could be interfaced to the environment they operated in. Limit switches (electrical and optical), encoders, resolvers, strain gauges,...

Continue Reading
4.187
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives