Nanocounter: Frequency Counter with an Android Interface
Test/Measurements

Nanocounter: Frequency Counter with an Android Interface

Andy published his accurate and open source frequency counter that uses an Android phone as a display. It’s based on a high accuracy temperature compensated crystal oscillator (TCXO) fed into a phase locked loop (PLL) to create a high frequency reference clock. The reference clock...

Continue Reading
5.157
Views
0 Comments
1″ 100W Hot-Plate for SMT Reflow
Arduino

1″ 100W Hot-Plate for SMT Reflow

This is a small hot-plate for SMT reflow soldering build upon an Arduino Pro and controlled using PWM and high side power MOSFETs. Black Mesa Labs has been using a $20 hot plate for a year now for soldering QFN ICs to PCBs. Only issue so far has been the size ( 10″x10″x3″ ) and...

Continue Reading
5.887
Views
0 Comments
VoCore: A Cheap And Coin-sized Linux Computer With Wi-Fi
Mcu

VoCore: A Cheap And Coin-sized Linux Computer With Wi-Fi

VoCore is an open source hardware that runs OpenWRT Linux. This tiny computer comes with Wi-Fi, USB, 20+ GPIOs that will help you to embed it on your projects. With each passing day, mini computer boards are getting more and more popular. Single board computers like Raspberry Pi,...

Continue Reading
6.161
Views
0 Comments
9V to 1kV DC/DC converter
High Voltage

9V to 1kV DC/DC converter

Bob tipped us with his latest project, it's a 9V to 1kV DC-DC converter using CD4011 IC to produce a square wave and a IRF530 transistor to drive the transformer. Finally, I have made a new high voltage supply based on an inverter transformer and voltage doubler. It seems to be ok...

Continue Reading
10.265
Views
0 Comments
Dual DC Motor driver using two L293D
Motor

Dual DC Motor driver using two L293D

Dual DC Motor driver using two L293D IC. The L293D device is quadruple high-current half-H driver. The 293D is designed to provide bidirectional drive current up to 600mA a voltage from 5V to 36V. It provides 600mA +600mA on each channel suitable for mini hobby robots. The board been...

Continue Reading
4.916
Views
0 Comments
Getting Started With the ATMega328P
Mcu

Getting Started With the ATMega328P

Here is a detailed guide on how to get started with ATMega328P microcontroller. The guide goes in details on how to setup it on a breadboard and how to upload your first code on it. and blink a led. The real benefit of using this microcontroller is that it’s only $4 US, whereas...

Continue Reading
5.313
Views
0 Comments
Build an 8-Bit Heart with MeowCAD
Websites

Build an 8-Bit Heart with MeowCAD

You can find some interesting projects on MeowCAD and one of these is a“8 Bit Heart”. MeowCAD is an online, in-browser electronics design tool that's completely free and open source. Use it to create schematics, printed circuit boards, share with your friends or just play...

Continue Reading
4.626
Views
0 Comments
IoT IP camera teardown and getting root password
Miscellaneous

IoT IP camera teardown and getting root password

Jelmer @ jelmertiete.com did a teardown on a cheap IP camera and also obtained the root password of it with the goal to investigate the security of such a devices. He writes: IP Cameras have become extremely cheap in the last couple of years. Mass production made the prices of...

Continue Reading
6.482
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives