login
This is the image preview of the following page:
BML project for using a $2 FTDI FT260Q for adding 14 bits of GPIO to any PC via USB with no device drivers required. Ever miss the simple days of using a PC’s LPT1 parallel port to bit-bang GPIO over 8 output pins and 4 input pins of the DB-25 connector? I sure do. My first design project as a ... Read More
Image Downloads:
- full (356x187)
- thumbnail (150x150)
- medium (300x158)
- medium_large (356x187)
- large (356x187)
- 1536x1536 (356x187)
- 2048x2048 (356x187)
- re_large (356x187)
- re_xxmedium (290x187)
- re_xmedium (356x187)
- re_medium (356x187)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x187)
- menu-24x24 (24x13)
- menu-36x36 (36x19)
- menu-48x48 (48x25)
- sendpress-max (356x187)
- woocommerce_thumbnail (300x187)
- woocommerce_single (356x187)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x79)
RELATED POSTS
4 September, 2017 Learn Arduino Easily with The Arduino Inventor’s Guide
31 March, 2016 LTC7813 – Low IQ, 60V Synchronous Boost+Buck Controller
17 October, 2017 OwnCloud on Raspberry Pi
30 January, 2020 5V/2A Synchronous DC-DC Converter IC Evaluation Kit
1 July, 2016 Exploring the Transcend Wifi-SD card
22 January, 2020 ST Releases Compact 32-pin STM8 Nucleo Boards
