Kevin Weddle
-
Posts
1,620 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by Kevin Weddle
-
-
.
-
fkf ukhuyjhvfrtrfv
-
Something I noticed about voltage multipliers. I've never seen two equally charged capacitors reverse bias a diode. But as long as the capacitors are completely charged the diode is reverse biased.
-
I know there is a simpler 15V to 45V voltage multiplier than the one I posted. It might be adequate. I won't bother posting that one.
-
Wow this Windows 10 is great.
-
Thanks guys. I love to hear you.
-
They always conduct. No matter what.
These two circuits are different. Resistors don't clamp a voltage. The voltages halve, halve, and halve again until Vp.
-
The other equation is Xc - Xl. So a series LRC is only inductive or capacitive.
-
In the quation v = L di/dt. The voltage goes up and the current goes up. In the equation
i = C dv/dt. The voltage goes up and the current goes up. -
The only addition I'll add to my post is the current of the capacitor must at least be C dv/dt.
-
Capacitor's pull current through a resistance. Then you have voltage momentarily.
-
I went ahead and built this circuit today. The input resistor voltage changed very little. The output transistor voltages changed quite a bit.
-
The schematic shown has a gain of 10. I changed the gain to 10,000 in this circuit. I don't know how unstable that would make it. I guess I'll have to match the opamp and output transistors.
-
-
There is this 0-30v power supply. It's okay. Opamps need a higher power supply voltage because of the complexity of the circuit.
-
The serialcom is a standard USB. So I guess it doesn't matter. It may be different from the more common computer power supply.
-
I've got a computer with an external DC power supply. Does this affect the serialcom connection?
-
-
-
-
No Hero99, that gain of 10 circuit is the same as the original project. Something simple. It is not the sort of circuit that is used.
-
That's true. And you can set the gain at 10, 100, or 10,000 and still have the exact same ouput.
-
Okay nobody likes two opamps. Are you going to put the load here or there. A gain of 100 is better unless it's a power supply for microwaves.
-
Yes, a gain of more than 1 is more desireable as the load current changes by a lot. A gain of 10 is very fine.
diodes
in Projects Q/A
Posted · Edited by Kevin Weddle
I think at 1Khz, the capacitor could not completely charge in one cycle.
No, that's not it. You have to make the resistance higher than the impedance of the capacitor.