Jump to content
Electronics-Lab.com Community

WildSwan

Members
  • Posts

    18
  • Joined

  • Last visited

    Never

Posts posted by WildSwan

  1. I built a project, a tone control for the 22W TDA1554 Power Amp. It is now working. But my problem is I can seem to make it sound loud unless I turn the vol to the max. And it starts to sound only whent the volume control is turned more than a quarter turn.

    Now, there is no problem with the sound. An I read somewhere that this fault is inherent when using a linear pot and that I should use a logarithmic pot. I can't find such pot here in the Philippines. Is there a work around this problem?

    Thanks.

  2. My bad. Very bad! I did your version Audioguru... but my Frequency is 50Hz when the AC freq in the Philippines is 60Hz.

    I will try to redi it again.



    Hi Wild Swan,
    Our original 500W inverter had errors so it didn't work. I helped correct the errors two and a half years ago. My corrected circuit recently was deleted from the project. Which circuit did you make?

    What happens to its output when it is loaded with more than only 50W?
    Do you have a fully charged car battery powering it through very heavy wires?
    Maybe its frequency is wrong.
  3. I built the original and never returned here again. I was busy trying to figure out why do the Inverter keeps on burning Electric Fans.

    Tha fan I used was the common type, one with the 0, 1, 2, 3 mechanical control, not electronics like a light dimmer.

    Now that I am out of aces, I returned here and surprised that the circuit has evolved. :D

    Now which circuit will not damage electric fans? I managed to destroy some numbers of electric fans over the years. :D

    I tend to beleive Ante... maybe the inverter are not for Inductive Loads. :(

×
  • Create New...