-
Posts
9 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Everything posted by MyzDy19
-
You need a microcode studio and a burner. Microcode is an application where you can create the program for the microcontroller and and you can create your own burner :D
-
We have a wireless cam that will be attached to our robotic surveillance. We will use a VB program to make the robotic surveillance move and we are planning to integrate the wc so that when we operate the robot we can also activate it using VB. But I don't know how to do that. I'm planning to use USB Rs232 db9 because we will use the laptop as the main controller. Does anyone here knows how to do that???
-
awtz >.< no chance.... Anyway, this is the wc that we will use http://www.cctv-centre.co.uk/cctv/pro240.htm :) 'Four times the amount of power' I'll remember that :D Thanks
-
Actually, I'm kinda confused about that. But, at the back of the box of wc I can see these: Scan Frequency: PAL/CCIR:50HZ NTSC/EIA:60HZ Output Power:50mW/250mW/300mW Frequency Control:0.9G/1.2G Power Consumption:<= 400mW I guess the fq of the tx is the .9G/1.2G??? My groupmate is the one who told me that the wc is only 10m because he tested it. Anyway, I visited the link...and it's good :) We will try to do that ^^
-
We have a wireless cam and it has a range of 10m; now our panelists told us that we should double it's range. In addition, we are not allowed to purchase a cam with 20m range. So what device should I use to do that (make 10m range to 20m range) ???