tasha
-
Posts
10 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by tasha
-
-
@sir audio
it's ok, what i need is voltage that can be adjusted from 3.7v to 5.5v only, don't really need up to 12volts sir=)
so can the new regulator do the trick for my requirements sir? -
sir audioguru, thank you very much for the patience in answering all of my questions, truly you are a wonderful asset her in electronicslab community=) muah muah=O
will this regulator do?
MAX1709 Description
4A, Low-Noise, High-Frequency, Step-Up DC-DC Converter -
is there by any chance that the circuit be tweaked so it can handle load that big?
or maybe i have to replace the stepup regulator? -
ok sir was able to test it loaded at 1.6amps sir
-
by the way thanx sir for the interest to help=)
-
huhuhuu...
sorry sir don't have a tester for current output=(
i set it to 6 volts then when loaded it dropped to 3.83v=( -
do i have to replace my regulator or can it be solved?
-
Good Day Sirs
I would like to ask for consultation to everyone who will be able to help me with my problem
i made an adjustable stepup voltage dc to dc converter, i was able reach my desired voltage but the problem is, i think it does not supply enough power, so even if i setup the voltage to 6volts once i plug in the device to the circuit the 6volts output drops to like 3+volts? can anyone help me with this? by the way here is the attached pic of the diagram i made using the lm2577
Step Up Battery Voltage Problem
in Projects Q/A
Posted
thanx sir hero, will do that now=) thanx=)