Jump to content
Electronics-Lab.com Community

ECET0purdue

Members
  • Posts

    314
  • Joined

  • Last visited

    Never

Everything posted by ECET0purdue

  1. yep still enough.............ummm what was the part again and can it be connected with out plug n play because in the house there will be a microcontoller connected to the tranceiver? thanks glen.
  2. 300 meters is good thats about 1000 feet here.... it can send and recive right....ok then...what is your suggestion...iam intrested... and iso is a standard...what does this have to do with it? also jamaica is south of north america. btw. 1feet = .3048 meters :D
  3. well iam not sure about the measurements in meaters...but i know about 50 feet or so. anything farther it will be done by rfid tags... (talk about that later)... ok maybe i should use voice / touch screen lol...ok ill stay on track.. ok so any ideal on transceivers i searched and only found very little on them ...ones for sale usually all i found was a remote with a reciver.. once again thanks for all the help. cheers, glen
  4. look into using a pic chip there pretty usefull for items like that... try a 16f84 you can get them free from ....some web site .... microchip.com maybe... i know they should have link it free items forum. cheers glen
  5. sorry such long time for replay but i was on vacation in jamica... :D ok so you think it will be much easier now thats good... i got it because i am giveing them advertising from my project...this is my senior design and a lot of companys watch this... so i asked them to donate one for the design and this is what they gave me... i belive it is over 900.00 value :D i did see there software and i never used it but i think i will try.... ok so now i got the screen next i should look into a transmitter.....or transceiver right so i can send and recive.... anything i should look for when looking for a transceiver ....thanks glen.
  6. or maybe even this..... http://www.measurementcomputing.com/cbicatalog/cbiproduct_new.asp?dept_id=415&pf_id=1667 cheers, Glen
  7. might want to check this out too... http://www.measurementcomputing.com/cbicatalog/cbiproduct.asp?dept%5Fid=120&pf%5Fid=235&mscssid=66BEU4BTW8WB9N4HHWNNPQX7KPPQ3GUC or http://www.measurementcomputing.com/cbicatalog/cbiproduct_new.asp?dept_id=415&pf_id=1712&mscssid=66BEU4BTW8WB9N4HHWNNPQX7KPPQ3GUC
  8. once you click on the link .......... ( the link did not take you were i wanted it to) go to Vehicle Terminals then you will see the TREQ™ DX on the right side of screen.
  9. here is the link to the screen http://www.qsicorp.com/images/in_development/ds_treq_dx.pdf also i found a place that makes the light switches so all i would have to do is replace the ones in the house.... let me know what you think about the screen thanks, glen
  10. What i was considering was using power line commucation for the control of the lights from a display in the house...then the display in the car would send and recive information to the panel in the house. Also i was thinking about the cell phone and i think is i used RFID technology with the cell phone it would be easer. This way does not sound like it would cost too much. The whole reason i started with wanting to use BB C++ was because the touch screen that i got as a donation...( nice donation) came with xp all ready in the screen...i have not recived the screen yet so i dont know exactly what all there sending but it if has xp then why not use C++? Any how .....what do you think about using Power Line Commucation for the lights. and the RFID for the cell phone.. i have not learned java that good but i do know a little and could get help on programming it. I also have programed pic chips, some DSP chips and for micocontollers i only done simulations. ........thanks for the questions. and ill looking forward to more. Also ..if i dont use BB C++ for the visual screen ...what would i use for visual screen.... is there a different program that would work better? if what? :) once again thanks, glen
  11. audioguru......you got a pic of that pigeon holder ? Cheers Glen
  12. After all you have more post then me ;D ;D
  13. if you really think it is tooo hard please tell me why? and then i could research it a little ...the part you think will be the hardest? i dont know how long you have been doing this but iam sure its been longer then me and you would know were i would run into problems? thanks Glen
  14. Also i found a data acquisition device that works with Borland Builder C++ with 96 outputs. i figure this would be good? Thanks, Glen
  15. yes i know...i also know there is a differenct between borland C++ and Borland Builder C++ the difference is Builder has is visual ( push buttons, listbox, ect. ) and i hope that this is not to hard ...well i dont think it is this is my 4th year in this program as an Electrical and Computer Engineering ....and i think if i cant do this project then i should not get a job in this field. I mean all iam doing is sending information wireless to a chip then the chip will control relays? Does anyone else think this is too hard??? before i pick this as my senior design?
  16. i would use C++ for the operator / touch screen. Well i though. i seen a touch screen that has xp loaded on it and though this might make it even easer? Well i will fing out because i think this will be my senior desgin.... i have used assebly but then how would i make the user interface...or do touch screens come with there own program? thanks for the replys,.. Cheers, Glen
  17. no opions... will it work is it eazy?
  18. hello, I have started my new project. I had a question or 2.. Iam going to make this project for my car. It will have a display screen and will show each light in the house. so if i leave the house and forgot to turn off a light it will show up on the screen and i could then press the button (touch screen i guess) and it would turn it off. Same thing if you were comming home late and wanted to turn on the porch light you could from your car. Now the project would only work say 50 yards away from your house. ok so i need a touch screen that would let you load borland C++ builder (perfer) Then from there it would go to a ? Microchip (any other device you know of) . then out to the transmitter. to the reciver then to some relays. This sounds around the area. so what iam asking is what kind of set up would i need for the panel and microchip. I perfer c++ programing but i know most touch screens have there own programs. and iam guessing i would commucate between the screen and chip via 9pin. And what kind of microchip? So if you have any suggestions on this project please let me know. maybe even any upgrades. Thanks, glen
  19. how do they measure the pressure in tires.... when moving of course...like hummers for example...they show the pressure in each tire...what do they use? thanks, glen
  20. this is the only one i could find in my emails.. i had to give this guy all shipping info [email protected] if anything iam sure he would forward it to whoever could help you. i emailed sales though the website and i belive it was also fowarded to the right person.. his email again.. [email protected] cheers. Glen
  21. ever head of the give a penny take a penny......i bet you just take the pennies...
  22. true but it is hard to think up a project for something that you have no problem for and that is not eazy yet hard and is not done all the time... plus if you do have a good ideal the school has the copy rights to that project..so you dont want anything you think of.... cheers.
  23. well i just emailed them and asked for a free sample? i do have a company email which is probly why i got it? but they paid for shipping too.. :)
×
  • Create New...