Jump to content
Electronics-Lab.com Community

hotwaterwizard

Members
  • Posts

    2,022
  • Joined

  • Last visited

Everything posted by hotwaterwizard

  1. STR-D6108 is on this list http://www.ssg-de.com/ssg_html/german/uploads/akt2/2000-03-07%20Sanken%20Products%20Discont%20Notice.pdf
  2. Transistor, IC Diode, Capacitor, Resistor ?????????
  3. I have been looking for it faithfully and have not found it yet.
  4. Look at this. http://www.interq.or.jp/japan/se-inoue/e_ckt14.htm
  5. Usually a varible speed Drill running real slow works well if you mount it in a vice. Run a screw and nut thru the core and put it in the drill. A Lathe works even better.
  6. If we could figure out a way to use a button to increase voltage every time you push it and have a capacitor discharge timer to decrease the voltage slowly unless the button was pushed again we could use a Bargraph Display Driver like the LM3914 ,5 or 6 to do the job. Look at the Datasheet for more Ideas. http://www.national.com/ds/LM/LM3914.pdf http://www.national.com/ds/LM/LM3915.pdf http://www.national.com/ds/LM/LM3916.pdf
  7. Have you tried Emailing the Author? http://www.compulink.co.uk/~lasertag/lasertag.htm#diy
  8. Here are some other circuits to look at. http://www.lasertag.de/index.php3?i=tech http://homepage.ntlworld.com/sparta/lcbasic.pdf http://www.armory.com/~spcecdt/history/ModDescription.html http://www.myownlittleworld.org.uk/fiat-lux/technical_overview.htm http://www.1sourcelasertag.com/blank?pageid=9&catstart=0&prodstart=0 http://instruct1.cit.cornell.edu/courses/ee476/FinalProjects/s2002/cmp28/hard.html
  9. Look at these links. led counters The Last circuit is closest. If you use a switch debouncer circuit instead of the timer it will count up when you push the button . Use a delayed on timer with a reset triggered by the same debouncer for the down sequence then you will have your circuit. The only problem is resetting the whole circuit. I think you can just turn off the power to reset the sequence. ??? http://a402.phys.psu.edu/402/Exp/E8/E8.html http://www.interq.or.jp/japan/se-inoue/e_ckt14.htm http://www.geocities.com/lemagicien_2000/elecpage/bounlite/bounlight.html
  10. Here is one from another post in the Circuit Request Section.
  11. IR3To7 is a Preamp. CLICK HERE TAG GUN pdf It is not a Datasheet but it is helpful.
  12. Ohhh Ahhh I like it I Love it I want Some more of it! ::)
  13. I see it opened. I merged the Two as well.
  14. Another one. http://www.microsemi.com/datasheets/2n3441.pdf And Another. http://www.semelab.co.uk/pdf/bipolar/2N3441.pdf
  15. Well I found a bunch of them at the website. I can Email them or you can go there and download them yourself. http://www.liteon.com.tw/databook/default.htm To navigate to the datasheets on the site : Look to the left side Box Click on LED Display Then Click on Dot Matrix Then Click on one of the blue Index Arrows I went with #1
  16. How about This? http://www.ti.com/sc/docs/news/2001/01218.htm
  17. There are 2 Cross referances to this IC NTE65101 and SK9829 Here is the Datasheet for the NTE Part. nte65101.pdf
  18. No but, These will! :o http://www.lennard.net.nz/electronics/fc.html#cct http://homepages.paradise.net.nz/bhabbott/charger.html http://www.angelfire.com/electronic/hayles/charge1.html
×
  • Create New...