Jump to content
Electronics-Lab.com Community

Build a simple PC oscilloscope


Recommended Posts

Hi all !

After I have bought my brand new usb logic analyzer :D

(have a look : http://www.usb-instruments.com/hardware-ant8.html)

which I need most, because digitals is my main hobby, I am thinking of building a simple pc oscilloscope as well, rather than buying a new one, because it is not critical for my needs. I want to write my own software (in Delphi) because most of the existing projects I have found are working only with win95/98 (not 2k/xp) and they don't have a professional interface, rather trivial I'd say.

So I have done a search on the net on this subject and I found the following projects (one to three stars * for complexity according to my opinion).

***http://kudelsko.free.fr/index2.htm
***http://alternatezone.com/electronics/dsoamk3.htm
**http://www.chocbar.demon.co.uk/
**http://www.ee.washington.edu/conselec/CE/sp95reports/guterman/final/scope1.htm
*http://scopeonpc.tripod.com/
*http://www.geocities.com/lptscope/hw.html

If somebody knows anything more, just let me know, the net is vast indeed :)

From all the above I have liked

http://www.geocities.com/lptscope/hw.html

and I have a question :

It uses the ADC0820 8-bit A/D which has an input of maximum +5volts, but it says that you can use a voltage divider in order to expand this range. Has anyone any idea how you can do that ? I prefer +-50volts because it is good for most applications (for instance PSU testing).

Thanks and I am waiting for your ideas ! 8)


Link to comment
Share on other sites


And finally this is the best of all :

I have found schematics of a pc oscilloscope that works with
the PICOScope software !!!

http://free-ri.hinet.hr/abacus-ri/

from this thread :

http://groups.google.com/groups?q=pico+scope&hl=el&lr=&ie=UTF-8&oe=UTF-8&selm=aflbt6%242akr%241%40as201.hinet.hr&rnum=4

but I still want to expand the 5v input to 50 v... :-\

Link to comment
Share on other sites

hi

i just have an idea about what you said of +5 volt as a maximam i/p.
i think you can not give the pc souncard very high voltage or it will
burn, so you have to use attenuators, not neccessarily a voltage
divider and you may enter the attenuation level as a data to your
software.
that is all and i thank you that you started this interesting subject
and money saver.

Link to comment
Share on other sites

You are correct. Most PC devices will not allow more than 5 volts. Some cards have over voltage protection, but I would not use a higher voltage as a test to find out if yours has protection. You should decide what your highest voltage will be. Is it 5 Volts Pk-Pk?, 10 volts Pk-Pk? When you have this figured out, then you just use a small transformer to drop it down. Sound is an AC voltage, so transformers work great for these. There are several types used for telephone equipment that will work fine for you. perhaps you want a 2:1 or similar.

MP

Link to comment
Share on other sites

  • 2 months later...
Guest Kasamiko

OK,but got some question about it..
1. Where in my sound card i'm going to connect it? line-in?
2. The sound card is STEREO(of course) what particular channel i put it in?

Thanks again..

Link to comment
Share on other sites

Kasamiko,

How you connect it to the soundcard depends on which software you use. Most of them use the line-in for this but even the mic-input is sometimes used. Both channels is used to dual channel scope software. There is also some software for frequency measuring if you just want to count the waves and not look at them ;D which uses the same inputs.

Ante ::)


Link to comment
Share on other sites

Guest Kasamiko

Thanks ANTE.. ;D I'm planning to use the Winscope and would like to "VIEW" the waveform of various Power inverter that we've been discussed here.. 8) 8)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...