bogdan Posted March 7, 2004 Report Posted March 7, 2004 when a quartz cristal is swueezed it produces some electricity. has anyone thought to use this for charging something?or maybe use this electricity to power something?these kind of things are used in lighters and other stuff.has anyone actually built this??? Quote
ante Posted March 7, 2004 Report Posted March 7, 2004 Hi. bogdan.The energy in this is very low; I don Quote
Guest Posted March 9, 2004 Report Posted March 9, 2004 Crystals are used to charge batteries of mobiles ,etc . the crystals are kept in the heels of the shoes so as you walk charging takes place. Pocket radio and other devices are quite suitable for this. Quote
MP Posted March 9, 2004 Report Posted March 9, 2004 Siddu, this is very interesting. Do you know of a website with more information regarding this? Any schematic examples of designs used to do this?MP Quote
bogdan Posted March 11, 2004 Author Report Posted March 11, 2004 Siddhu,this is what i have seen on tv some time ago, yet i didn't catch too much.do you know any website? Quote
Guest Posted April 2, 2004 Report Posted April 2, 2004 Sorry for delay since i was quite busy. I got this information from my friend who had read this in some newspaper.I'll try to find the schematic diagram.You could try it out yourself.I could not do it myself since i could not get suitable size crystals. Quote
ante Posted April 2, 2004 Report Posted April 2, 2004 Must be some [glow=red,2,300]BIG[/glow] crystals if they are used to charge batterys.Ante ::) Quote
Guest Posted April 7, 2004 Report Posted April 7, 2004 Maybe not so big as you are imagining dear Ante. The small amount is stored slowly and then just enough.Penny Penny Make Good Money Quote
bogdan Posted April 18, 2004 Author Report Posted April 18, 2004 well, keep looking for that schematic....i really want to try it...also, you know anything about generating power from a pletier moddule by heating it with a candle? Quote
ante Posted April 18, 2004 Report Posted April 18, 2004 Siddhu,While we are waiting........................To charge any form of battery there are a threshold for the current/voltage. If there is not enough energy you cannot overcome this threshold and there will be no charging done.Ante ::) Quote
MP Posted April 18, 2004 Report Posted April 18, 2004 Hi ante. To add to this:Yes, this is mostly dependent upon the voltage available. (but of course voltage does not move without current) As we see in a solar panel charging a 12 VDC car battery, there is not much current coming from the solar panel, but the voltage is normally around 20 VDC when not connected to anything. When connected together, the battery then pulls the solar panel voltage down to it's voltage potential and the solar panel gives the battery some charge.This is only able to work because the solar panel continues to convert light to energy. If it were just a storage container, it would just be drained by the large capacity of the battery and become useless.I am curious to see how these crystals work in this scheme. I am assuming the use of crystals might be what is called a trickle charge?MP Quote
Guest Posted April 20, 2004 Report Posted April 20, 2004 Well i found articles on this on the sites belowhttp://www.halfbakery.com/idea/Piezoelectric_20Batteries#1081394080http://www.orau.org/ptp/collection/civildefense/cdv750mod6.htm Quote
ante Posted April 20, 2004 Report Posted April 20, 2004 At least I could smile ;D at these articles I mean; Quote
steven Posted May 5, 2004 Report Posted May 5, 2004 :)this is intresting , the generation of electrissity useing quartz crystals. well when the movement of the earths crust happens dureing an earth quake, the quartz in the ground is subjected to alot of stress this causes it to give off energy , now you can test this on a small scale, you will need one small flatt quartz speaker ,i think it is. youll find them in those musical cards that play musical tunes when you open them. take the small disk shape speaker, out and solder an led to it. a small led, get the legs right way around positive to positive of speaker disc and negative to negative, it may work the other way around, but when you subject that little disk to pressure from slightly bending it, the led will light up as you apply pressure to it when bending it slightly, steven Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.