Power Supply w/ 3 Digit Panel Meter

[pmontone]

I have built a power supply using a 25.2v transformer and a LM317T variable voltage regulator. I am using the center tap on the transformer so there is another 12.6v available. My question is how would I add the digital panel meter project on this site into the circuit?

[ante]

Hi pmontone!

Which kind of panel meter is you planning to use?

Ante ::)

[pmontone]

I am planing to use this meter: http://www.electronics-lab.com/projects/test/014/

I have taken out one of the digits because my supply will never go about 99.9V

[MP]

pmontone, the output of your power supply would connect also to the input of this project. Then you will have a digital display.
There is a conversation about this project that will also give you pointers. You should use the search to find it or follow the link from the project.

MP

[Guest]

pmontone, you check out this link. It might help you.

http://users.otenet.gr/~athsam/digital_volt_and_ambere_meter_eng.htm

[ante]

There is nothing there !!

Ante ::)