Kevin Weddle Posted May 1, 2004 Report Share Posted May 1, 2004 Has anybody seen the calculations for the more complicated LCR circuits. I understand the basic circuits, but any addition is not well illustrated in the book I have. Take a simple series LC and parallel the capacitor with a resistor. This goes beyond what I have seen being calculated. If a circuit is nowhere near the resonant frequency, can we assume the regular impedance of the capacitor and inductor?We could start with voltage subtraction. The inductive reactance tends to subtract from the capacitive reactance. A parallel resistor will tend to make it an LR or RC circuitXL = 50XC = 100then impedance is 50Make it an RC circuit R=200then impedance = 300so the impedance is somewhere between these two values. Quote Link to comment Share on other sites More sharing options...
russlk Posted May 21, 2004 Report Share Posted May 21, 2004 You can't use the reactance as a plain number, you have to consider the phase angel. The current leads the voltage by 90 degrees in a capacitor and lags by 90 degrees in an inductor. The reactance of an inductor is given by Xl = 2*PI*f*Lwhere PI=3.14162, f= frequency in Hz, L=inductance in henries.The reactance of a capacitor is given by Xc = 1/(2*PI*f*C).The quantity 2*PI*f is given the symbol ohmega, but since I don't have that symbol on the keyboard, I will use W. The 90 degree phase angle is denoted by j, so now Xl = j*W*L and Xc = 1/(j*W*C).The advantage of this nominclature is that it is easy to add series impedances: Z = Xl+R = j*W*L+RParallel impedances is the familiar product over sum: Z = j*W*L*R/(j*W*L+R).You can convert a parallel circuit to an equivalent series circuit and vice-versa. I used to be able to practically do that in my head, but it has been many years. Quote Link to comment Share on other sites More sharing options...
Kevin Weddle Posted May 25, 2004 Author Report Share Posted May 25, 2004 I use vectors any way I can. Formulas are easy to work with but, in the case of electronics, they don't make much sense. We need a way to make sense of the relationship without turning it into a sequence of mathematical operations. Do you understand what I mean? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.