Jump to content
Electronics-Lab.com Community

Help needed selecting a chip for my project


Recommended Posts

I have constructed a transmitter and a receiver using simple modules. The transmitter has four inputs which are displayed on output pins at the receiver. I need a chip that can display differing high pulses depending on which output pin is activated. For example output pin1 high gives two short pulses (ths could be used to give two short LED flashes), output pin2 gives two longer pulses, ouput pin3 gives one long constant pulse and so on.

I'm quite a newbie at this and was wondering if it is possible to buy ready made chips to do this chip or would it involve some programming? If it would involve programming how easy or difficult would this be?

Any help would be greatly appreciated.

Thanks,

James

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...