jeancarloabreu Posted June 2, 2004 Report Share Posted June 2, 2004 Greetings!(I am from Venezuela and my english is not so good, please try to understand .... and excuse me)I need to build a network in a laboratory with a strong emi emiter equipment, so is necesary to measure the emi at certain points of the laboratory. I dont know if a circuit may help me with this.Also i need to build a emi generator, to test how it affects the network. I must generate a electromagnetic field that interfere with a data transmision wire, the strong of the field must be measure as the data transmision rate. After this i would have an equation that relates the strong of the field with the interference in the wire (interferencia = f(EMI) or some thing about).The network its planed to use UTP CAT 5, but all the work is for a network course at my university.Please help me. Quote Link to comment Share on other sites More sharing options...
Kevin Weddle Posted June 2, 2004 Report Share Posted June 2, 2004 EMI can be generated when an inductor comes into close contact with another inductor. I have always suspected that for this reason a coil can't be located too close to a capacitors plates. I think I have even seen where this is a problem, but I'm not certain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.