Jump to content
Electronics-Lab.com Community

data transmission


Recommended Posts

sir,
Hello,
i am facing a problem in transmission of digital data and DC supply. the problem is that,

i have to transmit digital data RS-232 level and DC power (+24V at the surface) on the same cable.
Till now iam using 4- core steel armoured cable for this purpose the four wires are utilised as:

1. for sending the +24 V DC and the cable resistance is 8 OHMS per 100 meters. normally i use 200-250 m cable this instrument is for data logging from sub surface. The electronics works on +12 V DC. The electronics consists of MIcrocontroller, memory chips, ADC chip, etc.
2. for the supply ground.
3. for transmission of the digital data RS-232 level with Driver.
4. the signal Ground.
because of the above the cable is very bulky and heavy.

the digital data is stored in the PC on the surface using serial port.

So request your help in suggesting a way to transmit the DATA as well the DC supply on the same cable.
your valuble suggestion will be very much helpful to me.

thnking you, with best wishes,

mahathi.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...