Jump to content
Electronics-Lab.com Community

EAGLE USERS...i nid some assistance....


ampdeck
 Share

Recommended Posts

I use F09HP, which is a female DB9 sitting on the board hoizontal. You can also use F09HPS which is the same connector but with a different schematic symbol. The F09VP or F09VPS will sit on the board pointing straight up if this is the style of connector you want to use.
If you will be using a male connector, you will want to use the M09 versions or the pin-out will be backwards when you connect it to another device. Many do not take this into consideration. You must know if you will use Female or Male connector on the board at this point in the design, so be careful.

MP

Link to comment
Share on other sites


I use F09HP, which is a female DB9 sitting on the board hoizontal. You can also use F09HPS which is the same connector but with a different schematic symbol. The F09VP or F09VPS will sit on the board pointing straight up if this is the style of connector you want to use.
If you will be using a male connector, you will want to use the M09 versions or the pin-out will be backwards when you connect it to another device. Many do not take this into consideration. You must know if you will use Female or Male connector on the board at this point in the design, so be careful.

MP



tnx,mate more power.....
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...