stuee Posted October 11, 2004 Report Share Posted October 11, 2004 Anyone have a schematic?Thanks Quote Link to comment Share on other sites More sharing options...
KeepGood Posted December 9, 2004 Report Share Posted December 9, 2004 Hi,As far as I can see, the terminator is just a 330 Ohm resistor.Sorry I cant tell you what pins the resistor needs to be on, I'm checking this from an SCA adapter I have here. All of my drives are SCA80 so I need to use adaptors.Remember most new scsi controllers support auto termination, check in your scsi bios config for an auto setting. If you drive isnt appering, see if your controller is set to SE (single ended) or if there are other SE devices on the same line, SE and LVD devices shouldnt be attached to the same scsi bus. Quote Link to comment Share on other sites More sharing options...
ante Posted December 9, 2004 Report Share Posted December 9, 2004 stuee,For a scsi terminator schematic and a lot of other connectors I would recommend The Hardware Book v1.3 by Joakim Ogren. This can be downloaded from here: http://www.electronics-lab.com/index.html Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.