GOKAR Posted May 14, 2005 Report Share Posted May 14, 2005 Looking for an Ultrasonic Cleaner schematic.Gokar FranceRouze 1 Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 14, 2005 Report Share Posted May 14, 2005 http://repairfaq.ece.drexel.edu/sam/samschem.htm#schahvhttp://nawcc-mb.infopop.cc/eve/ubb.x/a/tpc/f/9486087461/m/604005507/r/8981072221http://www.vibronicsindia.com/ultrasonic-cleaners.html Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 17, 2005 Report Share Posted May 17, 2005 Coppied from:http://repairfaq.ece.drexel.edu/sam/samschem.htm#schahvUltrasonic CleanerUltrasonic cleaning is a means of removing dirt and surface contamination from intricate and/or delicate parts using powerful high frequency sound waves in a liquid (water/detergent/solvent) bath. An ultrasonic cleaner contains a power oscillator driving a large piezoelectric transducer under the cleaning tank. Depending on capacity, these can be quite massive. A typical circuit is shown below. This is from a Branson Model 41-4000 which is typical of a small consumer grade unit. The H and N are Hot and Neutral of the 115 VAC line. WARNING: Line connected input. Use isolation transformer for safety when troubleshooting. Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 17, 2005 Report Share Posted May 17, 2005 hotwaterwizard, I think yo need to turn smilies of for that post. :( Quote Link to comment Share on other sites More sharing options...
GreekPIC Posted May 17, 2005 Report Share Posted May 17, 2005 Ha ha! That's a happy schematic!!! ;D ;D ;D Quote Link to comment Share on other sites More sharing options...
audioguru Posted May 17, 2005 Report Share Posted May 17, 2005 Can you remember years ago before you knew anything about electronics, when every schematic looked like snakes and ladders like that ASCII one looks like now?It gives me the creeps! :( ;D ;D Quote Link to comment Share on other sites More sharing options...
Dazza Posted May 17, 2005 Report Share Posted May 17, 2005 Well I can remember months ago when I knew nothing about electronics ;D, and I came across these types of schematics and thought, (what the) and now seeing frowning faces in them, well that's just scary :o ;D. Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 18, 2005 Report Share Posted May 18, 2005 I'm trying to make a schematic from this one.Here is what I have so far.Are there any misteaks? Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 18, 2005 Report Share Posted May 18, 2005 So far so good hotwaterwizard, how are you drawing this?Are you using a special program or are you using paint and putting some pre-drawn symbols togeather? Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 22, 2005 Report Share Posted May 22, 2005 I do all of my drawings in Paint Brush. Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 22, 2005 Report Share Posted May 22, 2005 Good work hotwaterwizard you're a credit to this community. Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 30, 2005 Report Share Posted May 30, 2005 Well spotted tnk2k, I completely missed that! ;DThe output's also pulsed 80kHz not 90Hz. Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 30, 2005 Report Share Posted May 30, 2005 Here Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 30, 2005 Report Share Posted May 30, 2005 You've still forgotten to put the kHz in, here I've done it for you. ;DI can't see any other errors but don't take my word for it come back in a weeks time and see ;D Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 30, 2005 Report Share Posted May 30, 2005 LOOK AGAINI think you are looking at the first not the last because I did correct it! Quote Link to comment Share on other sites More sharing options...
Guest Alun Posted May 30, 2005 Report Share Posted May 30, 2005 You changed the 90 to 80 but you forgot the all important kHz part. ;D Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted May 30, 2005 Report Share Posted May 30, 2005 The frequency of the ultrasound is approximately 80 kHz for this unit with a maximum amplitude of about 460 VAC RMS (1,300 V p-p) for a 115 VAC input. OOPS I Did forget :o Quote Link to comment Share on other sites More sharing options...
GOKAR Posted September 8, 2005 Author Report Share Posted September 8, 2005 I found a new Ultrasonic Cleaner new project:--BUILD THIS ULTRASONIC CLEANERUltrasonic_Cleaner--Project.pdf Quote Link to comment Share on other sites More sharing options...
Guest Kasamiko Posted September 8, 2005 Report Share Posted September 8, 2005 Where is the others page? ???rhonn ;) ;) Quote Link to comment Share on other sites More sharing options...
GOKAR Posted September 9, 2005 Author Report Share Posted September 9, 2005 I have this magazine with all the other 44 pages but I do not have any scanner.Very sad! Quote Link to comment Share on other sites More sharing options...
GOKAR Posted October 22, 2005 Author Report Share Posted October 22, 2005 Buid This Ultrasonic Cleaner--DIY Project Quote Link to comment Share on other sites More sharing options...
GOKAR Posted October 22, 2005 Author Report Share Posted October 22, 2005 Build This Ultrasonic Cleaner--(11 Pages)---Project Quote Link to comment Share on other sites More sharing options...
GOKAR Posted October 22, 2005 Author Report Share Posted October 22, 2005 Build This Ultrasonic CleanerPg---1.pdf Quote Link to comment Share on other sites More sharing options...
GOKAR Posted October 22, 2005 Author Report Share Posted October 22, 2005 Build This Ultrasonic CleanerPg----2.pdf Quote Link to comment Share on other sites More sharing options...
GOKAR Posted October 22, 2005 Author Report Share Posted October 22, 2005 Build This Ultrasonic CleanerPg---3.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.