HNoodleBoy1990 Posted February 27, 2006 Report Posted February 27, 2006 I made it so the volts come out of the nuckles. but the volts are not strong enough to go through a shirt so what Quote
ante Posted February 27, 2006 Report Posted February 27, 2006 Hi Noodle,Welcome to our forum.You have to spray the victims clothes with water first! ;D Quote
steven Posted February 28, 2006 Report Posted February 28, 2006 your shirt is like a dielectric, and the voltage wont go through it unlless its conductive , so you will need the voltage to arc through it to the skin or body, being a better medium for it to go to so your stun glove would be better putting out arcs. than just plain electrissity that wont go through anything thats non copnductive Quote
steven Posted February 28, 2006 Report Posted February 28, 2006 :)http://www.freeinfosociety.com/electronics/schematics/weaponry/stungloves.doc here is something that may give you some help or ideas Quote
ZAP101 Posted March 20, 2006 Report Posted March 20, 2006 If you raise the frequency...It will better penetrate(jump) Quote
windoze killa Posted April 5, 2006 Report Posted April 5, 2006 Not sure about the legalities of these but it sounds fun. Quote
rybitski Posted May 11, 2006 Report Posted May 11, 2006 What did you use to make your stun glove? Quote
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.