Jump to content
Electronics-Lab.com Community

'potential Difference' questions


shekhar_dandya

Recommended Posts


So,motion of electrons constitute current.Hence its current that creates "potential Difference",right?or is it that "potential difference" causes current?Is this that-first egg or chicken problem?
BTW I still don't understand the basic origin of Energy in a battery,exactly which chemical energy is released to convert to potential energy?
What is EMF?What is its cause?I learned this concepts in junior college but never thought on it deeply,so forgotten.can ne1 explain?

Link to comment
Share on other sites

  • 1 month later...

HI GUYS I JUST WANT TO SAY THIS ... BATTERY WHEN IT'S NOT CONNECT ; CALL IT A STATE  OF REST DOES NOT HAVE A POTENTIAL DIFFERENT INSTEAD IT HAS AN E.M.F AND WHEN THIS FORCE IS ACTIVE BETWEEN TWO POINT WE SAY THERE IS A POTENTIAL DIFFERENCE BETWEEN THOSE POINTS.

THANKS.

Link to comment
Share on other sites

  • 1 month later...

Imagine water flowing through a pipe. It's the difference in pressure between the two ends of the pipe that causes the water to flow. If the pressure at the two ends is equal, there's nothing to push the water. The same principle can be used to explain the movement of electrical charges in a wire. Potential difference being what "pushes" those charges, causing a current flow.

So, is it correct to say when there is no load across a battery, then there's no potential difference, only E.M.F.? I find that utterly confusing, especially considering that there is ALWAYS a load on the battery, even if it's only the air between the connectors!

If you put a valve in the middle of that water pipe, apply a pressure difference between the ends, and switch the valve off to block weater flow, does that mean that now there is no pressure difference between the ends? Of course not.

However, from a design perspective, it doesn't often help to exclusively define potential difference as the cause of current flow, or to say that current flowing will cause a potential difference to drop across whatever it flows through.

If you have a constant current sink/source in series with a resistor, you imagine that the sink/source will determine the current flowing through the resistor, thus causing some calculable  voltage drop across the resistor - in this case you know the current, and work out the voltage from it. That's a "current flow causes potential difference" paradigm, in spite of the above.

Conversely, a there are situations where you have a known potential difference, like a battery, and the load (say a resistor/LED) is calculated from a "potential difference causes current flow" paradigm.

The paradigm you settle upon(what causes what) during design will be determined by the context of the problem, rather than the nature of electric fields and charges. That's the domain of people who design transitors and such.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...