Siberia Posted March 8, 2006 Report Share Posted March 8, 2006 Greetings folks! Hope everyone is doing well. :)So, here's my first question to the group... ;)My father-in-law, who lives in Russia, is still looking for an IC. In fact, the last time I was there, 4 years ago, he was looking for that same part. When my wife talked to him last week, when asked if he wanted something, all he asked was this mysterious IC.So, the part number that he gave me, again, is the following: SN7216I have done numerous searches, on various search engine, but have had negative results so far. Any ideas where I could find out more info about this baby?Cheers and thanks, Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 8, 2006 Report Share Posted March 8, 2006 Hi SiberiaIts an old Texas Instrument IC, do you have any data on it, or a substitute for it?//Staigen Quote Link to comment Share on other sites More sharing options...
ante Posted March 8, 2006 Report Share Posted March 8, 2006 Hi Serge,What is it used for, can it perhaps be possible to rebuild the circuit to work with another IC? Is there a circuit diagram on this app? Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted March 9, 2006 Report Share Posted March 9, 2006 you sure it is not sn7416?sn7416.pdf Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 9, 2006 Author Report Share Posted March 9, 2006 Hi folks!I have no idea who makes it or what it is used for. No information was available from my father-in-law. When asked what it did, his answer was "I was hoping you would know"!! Hehehe I will be calling him, well, my wife actually, I can't speak squat in Russian. LOLOL I'll see if I can get more details/info about this IC. Maybe he has a schematic that he could get my nephew to email to me, or something.... Now, the SN7416 does make a LOT of sense! Hex inverter! That would be very cool indeed! Those little guys are like 50 cents a piece. He want 2... Heck, at that price, I'll bring him a bag full!!! LOLOLThanks guys for your time and input! More infor later....Cheers! Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 9, 2006 Report Share Posted March 9, 2006 Hi Siberia, Ante and hotwaterwizardWasn't Texas Instrument's IC:s beginning with SN72xx OP-AMPs?I have a substitute list for them somewhere(The Texas Instruments Linear Handbook). The book is old, and some of these IC:s was substituted allready then.Its too late to look for that book now.//Staigen Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 11, 2006 Author Report Share Posted March 11, 2006 Hi Siberia, Ante and hotwaterwizardWasn't Texas Instrument's IC:s beginning with SN72xx OP-AMPs?I have a substitute list for them somewhere(The Texas Instruments Linear Handbook). The book is old, and some of these IC:s was substituted allready then.Its too late to look for that book now.//StaigenHi Staigen!It is a possibility then that the SN72 group did exist in earlier days. Hehe If you have that old manual, it would be appreciated, when you have time, if you would see if that SN7216 is listed there and what would be today's replacement part. :)If I could only find that book you refer to, that would be neat also. In recent days, I have found numerous web site that say they can provide/find old and discontinued IC, but none of them return a positive result.I'll see what comes out of the phone conversation with my father-in-law this week-end. Stay tuned for more. ;)Cheers! Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 13, 2006 Report Share Posted March 13, 2006 Hi SiberiaI forgot to look for my books, i do that today, hopefully the IC is listed thereI have been sick, have a cold, its boiling in my whole head//Staigen Quote Link to comment Share on other sites More sharing options...
aProgrammer Posted March 13, 2006 Report Share Posted March 13, 2006 yes SN72... are linear ICsI searched and found SN7216 don't existall SN72... are SN72XXX (five digits)for example, SN72106 = LM106/206/306 Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 13, 2006 Author Report Share Posted March 13, 2006 Staigen:No need to worry about books or whatever. You are sick, so take care of yourself first! That is more important. :)aProgrammer:It is quite possible that my father-in-law fouled up the information when he passed it on to me. ;)We will be calling him tonight, I hope, to clarify the original information. The old chap was not home on the week-end.Take care, 8) Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 13, 2006 Report Share Posted March 13, 2006 Hi SiberiaI'm sitting here now, with the book in front of me, and it is like aProgrammer say, its SN72xxx, for example SN72301A is the same as LM301A. But SN72106 dont seems to exist either, the old texas name for LM106 is SN52106, SN72306 do exist, its LM306. And it seems to be linear OP-amps, linear ICs like LM386 and such begins with SN76.//Staigen Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 13, 2006 Author Report Share Posted March 13, 2006 Hi SiberiaI'm sitting here now, with the book in front of me, and it is like aProgrammer say, its SN72xxx, for example SN72301A is the same as LM301A. But SN72106 dont seems to exist either, the old texas name for LM106 is SN52106, SN72306 do exist, its LM306. And it seems to be linear OP-amps, linear ICs like LM386 and such begins with SN76.//StaigenMmmm... Looks like I will really need my FIL to verify his information correctly. Thank you very much!!More news later...:) Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 19, 2006 Author Report Share Posted March 19, 2006 Sigh... It's me again. ::) We just got off the phone with my father-in-law. He is firm on the part number he has, but provided me with more information tho. :-\ He was holding the actual chip in his hand: 28 pins IC, SN7216A. :o From what he says, it is used to measure pulses (Wife's translation), so I assume it is some kind of digital frequency counter chip. He is quite the TV thinkerer kind of guy. His spare room at home looks like an electronics spare part depot. Hehehe So, I am off to research again and hopefully someone will have some clues where I can get my hands on this IC. Thanks again to all for your time and assistance.Serge ;D Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 19, 2006 Report Share Posted March 19, 2006 Hi again SergeThan i belive you have to supply us with lot more information about the IC!Is it a Texas Instrument brand? ALL TI IC:s beginning with SN72... is linearOP-AMP:s! And i have never seen a 28 pins OP-AMP in my whole life!Is it linear or digital?Also, its for his vifes translator. Translate what? From what? To what? Howold is this translator?Is it possible for him to come online and discuss this directly in this forum?It seems that hte more answers we get, the more questions arise.Maybee someone else know more about this IC//Staigen Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 19, 2006 Author Report Share Posted March 19, 2006 Hello Staigen, all,I do not think it is a TI chip. Hehehe I think I did not explain myself properly in my earlier post. The translator was my wife, who provided the translation from Russian to English. I do not think she would like me to tell her age on the internet. ;) I do not think my FIL could come on line for 2 reasons: mainly because he only speaks Russian, and does not have the financial means to afford a PC or internet connection from home. Way too expensive for them over there. :-\The chip is a digital IC and the information he provided was from looking at the chip he had in his hands:28 pins, used as/for frequency counter. Following our conversation today, I did find some information that could possibly be the chip he is looking for. Here are a link below. Let me know if this could be it, please. ;Dhttp://www.cirrus.it/pdf/232_2289.PDFI downloaded this PDF file and will be reading it thoroughly and try to find more details about this chip. It does seem to be the one: 28 pins, frequency counter. It is quite possible that the SN prefix was from the company who made the chip my FIL possess. Long saga.... ::) The things we do for family and friends. ;DCheers! And thanks for your time and interest! 8) Quote Link to comment Share on other sites More sharing options...
Staigen Posted March 19, 2006 Report Share Posted March 19, 2006 HiI where just going to propose Intersil ICL 7216(i belive it is the name for it) ICI am not sure about the name, i have the book in a place where i need daylightto get it, i have a look at it tomorrow.//Staigen Quote Link to comment Share on other sites More sharing options...
Siberia Posted March 21, 2006 Author Report Share Posted March 21, 2006 Hi Staigen,I believe I have found what my FIL requires, it is the ICM7216A from a company in Thailand:ICM7216DIPI - $18.28 USD each.CMOS 10MHZ UNIVERSAL COUNTER8 BIT COMMON ANODE/LED DRIVERI even found an 18 pages data sheet which provides details to build a 10 or 40 Mhz frequency timer. Kind of neat.Thanks everyone for your assistance!Cheers!8) Quote Link to comment Share on other sites More sharing options...
Siberia Posted April 8, 2006 Author Report Share Posted April 8, 2006 Hello gang!Well, the Thai company never responded to my inquiry, and further allowed me to find a company in California who could provide two of those, but the price was a stagering $75.00 USD each, plus shipping charges. :o :o :oMy wife comment was "Well, my dad will have to do without it". ::)Instead, I got a 40 Mhz counter on Ebay for 85$ Cdn. I'll have to check the power supply and see if it uses the supply cycle (50 - 60 Hz) for timming purposes. Should be eazy to fix. ;DCheers, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.