GreekPIC Posted May 20, 2006 Report Share Posted May 20, 2006 I saved a motherboard from the trip to the dumpster. It's from a HP machine and I can't find no info for it. What puzzles me is the front panel connector. It doesn't have the usual PWR LED, PWR SW, HD LED etc, pin header.There's only a six pin header labeled "FRCNT CABLE". So, does anybody know were I can find the manual or a way to figure how to turn this thing on? I just want the power switch pins, I don't care about the leds. Is there a way to trace it?I know the ATX PS wants pin 14 and 13 shorted to start, should it try to see if any of those is connected to the header?Thanks,Nikolas Quote Link to comment Share on other sites More sharing options...
GreekPIC Posted May 20, 2006 Author Report Share Posted May 20, 2006 Ok, small update. I found the PWR SW connection. Shorting pins 1 & 2 powers the system up and holding them for ~10sec turns it off.However it doesn't boot up. So I still need help for the manual (or ideas on what might be wrong). There is a DIP switch on the M/B I can't figure out and I'm not even sure it supports the CPU I installed (I read somewhere that it does).Nikolas Quote Link to comment Share on other sites More sharing options...
berohm Posted July 12, 2006 Report Share Posted July 12, 2006 try your luck @http://www.thegreenhouse.us/th99/#8 Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted August 18, 2006 Report Share Posted August 18, 2006 I found this.Here is one for sale on Ebay Maybe you could Email this seller with a Question about it.http://cgi.ebay.com/HP-Vectra-Motherboard-VB-609_W0QQitemZ120019746570QQihZ002QQcategoryZ4615QQssPageNameZWDVWQQrdZ1QQcmdZViewItemOther Search Resultshttp://www.gittigidiyor.com/php/urun.php?id=1814281 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.