jarmund Posted September 27, 2006 Report Share Posted September 27, 2006 Hiya. There are two things i need some help with, and they both involve PCB1. I am fixing an external souncard, where the USB-connector (female) has been torn off. The thing is that I wouldn't know how to go about replacing it. I've removed the old one, however, the place on the PCB where it used to be is so small that i dont know how to do this with the tool i have availible. The thing is that there are 4 wires that needs to connect to each separate points on an area of less than 1 square cm. Which tools should i use for this? Any tips/tricks i should know about?2. For a different project i am currently working on, i need to build atleast two PCBs, since size and wight is critical. Anyhoo... i dont have a clue of how to do it; I've made the layout and such, so what im askin is: Where do i go from here, to turn the design into an actually (working) PCB?What do i need?What are the things that needs to be done?Does anyone know of a good guide out there?-Thanks Quote Link to comment Share on other sites More sharing options...
nickagian Posted September 27, 2006 Report Share Posted September 27, 2006 Hi jarmund!I`m afraid that I can`t help you with the first point. However concerning the second one you can have a look at this topic : http://www.electronics-lab.com/forum/index.php?topic=171.0, you may find it useful. I haven`t yet, but I think it worths a try.I`m interested in a guide about PCB too! Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.