casdale Posted October 31, 2006 Report Share Posted October 31, 2006 I have a CRT monitor but has an issue, the data cable was cut, how would i fix it? i dont have the other end of the data cable, but i manage to get some cables from other CRT. any help in monitor pinouts please. additional info DIAMOND VIEW MONITOR, model no. 177fthsnk ;D Quote Link to comment Share on other sites More sharing options...
mvs sarma Posted October 31, 2006 Report Share Posted October 31, 2006 HI FOR EXAMPLE A VGA MONITOR BY DELL HAS INDICATED IN THE SITE BELOW http://support.dell.com/support/edocs/dta/NL25/00000005.htmPLEASE TRY OUT SARMA Quote Link to comment Share on other sites More sharing options...
mvs sarma Posted October 31, 2006 Report Share Posted October 31, 2006 PLEASE TRY THIS Color VGA AdapterPin# Label Function1 RED Red color signal2 GREEN Green color signal3 BLUE Blue color signal4 ID2 Monitor identification bit 25 N.C. Not Connected6 GND-RED Ground Red signal7 GND-GREEN Ground Green signal8 GND-BLUE Ground Blue signal9 N.C. Not Connected10 GND-SYNC Ground Sync signal11 ID1 Monitor identification bit 112 ID0 Monitor identification bit 013 H-SYNC Horizontal Synchronization14 V-SYNC Vertical Synchronization15 N.C. Not connectedSARMA Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.