vivek_pv Posted January 1, 2007 Report Share Posted January 1, 2007 Dears,I am making an op-amp driven audio-amplifier.For the input gain control, I used a pot.This actually cuts some of the frequencies of audio and creates a distortion.Please guide me how best I could make a gain controlRegards,V Quote Link to comment Share on other sites More sharing options...
audioguru Posted January 1, 2007 Report Share Posted January 1, 2007 A volume control pot or any resistor will form a highpass filter and cut low frequencies if the value of the pot is too low or if the input coupling capacitor's value is too low.If the value of the volume control pot is too high then stray capacitance will join it and form a lowpass filter which cuts high audio frequencies.If the volume control is not capacitor-coupled to the amplifier circuit then it will change the DC bias of the circuit and cause distortion.Attach the schematic with parts values and we will help you fix it. Quote Link to comment Share on other sites More sharing options...
Kevin Weddle Posted January 2, 2007 Report Share Posted January 2, 2007 Using the noninverting input will help a lot. Use high value resistors to bias the opamp and about a 1uF coupling capacitor. Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.