Jump to content
Electronics-Lab.com Community

Voltage Level shifting


Recommended Posts

Hello friends,

Initially I have to convert the 24V signal to 5V which I did using voltage divider circuit but now the thing is my input signal level is not decided it may vary from 15V to 24V so the question is how can I maintain 5V.

My input is varying from 15V to 24V but I required 5V output.. how can I do this??????????/
;D

Link to comment
Share on other sites



Hello friends,

Initially I have to convert the 24V signal to 5V which I did using voltage divider circuit but now the thing is my input signal level is not decided it may vary from 15V to 24V so the question is how can I maintain 5V.

My input is varying from 15V to 24V but I required 5V output.. how can I do this??????????/
;D


you didn't mention how much current you want to draw at 5V --neither you mentioned whether it is DC or AC-- i

if Dc you want large currents  use 7805 with adequate Hestsink.

if dc and for very small currents like less than 5 mA use a high watt (2watts)resistor of say220 ohms and a 2 watt zenor diode of 5 V or 5.1V (generally available

if it is AC power  you have to adopt different techniques.

Sarma
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...