Nub needing help with questions

[Bulldog]

This is long and Im sorry, I have some questions and some of the questions are in the pictures to help make it easier. I hope lol .

I have two different things that I would like to combine together to make into one thing. 

The first is a BELL bicycle light that runs on two AAA batteries. It has one button on the back and if you push it once it lights up all 5 leds and they stay on has seen in this video .
http://smg.photobucket.com/albums/v635/Redeye606th/led%20lights/?action=view&current=dad016.flv

Then if I hit the button again then they all flash together.
Video


Then if I hit the button again they all go to a slower flash. video
http://smg.photobucket.com/albums/v635/Redeye606th/led%20lights/?action=view&current=dad018.flv

Then hit button again they flash one , two and two . Video
http://smg.photobucket.com/albums/v635/Redeye606th/led%20lights/?action=view&current=dad019.flv


Then if I hit it again they they reverse and flash two, two and one. No need for video on this one.
Then the last one before it turns it off is that it flashes really fast. Video
http://smg.photobucket.com/albums/v635/Redeye606th/led%20lights/?action=view&current=dad020.flv


Know I took it apart to see what was inside and I cant tell anything.  The pictures have the quesions in them.


Top off with led lights . The screw at the end goes through the board into what I believe is some sort of flaher or what you guys call a timer.





This next picture is of the leds and my question is where do I find the board this size and what is it called?




Ok onto the next thing I have that I would like to know more about.







So has you can see , Im trying to learn this lol . ANY help is a BIG THANK YOU !!!

[Bulldog]

anyone?  ???

[Steve_hi]

You could get tube like that from a machine shop or mill supply store
reamers and drills come in tubes like that
you could cut a piece of strip board the size you need you can buy it from mouser futurlec or digi-key

[Bulldog]

Thank you.