steven Posted August 30, 2009 Report Posted August 30, 2009 high voltage resister devider 100 time ten m resistors in sieries and hv goes in one end and you measure the output voltage across your meter set to 600 volts if it reads say 113 its 11300 volts dc Quote
Hero999 Posted August 30, 2009 Report Posted August 30, 2009 The meter will have an impedance of 10M so to divide by 10, all you need to do is connect a 90M high voltage resistor in series with it. This can be made using nine 10M resistors in series, each resistor needs to be rated to 1/10th of voltage being measured. JerryAcert 1 Quote
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.